Name: Emerson Roadhouse BT pocket knife
Brand: Emerson Knives
SKU: EM-RDHS-BT
Availability: BackOrder

Schmuckatelli Emerson Skull Bead Pewter

notforsale

not_replaced_in

Schmuckatelli Emerson Skull Bead Roman Brass Oxidized

Schmuckatelli Emerson Skull Bead Black Oxidized

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Handle/blade: G10/154CM
Blade length: 9.4 cm
Weight: 170 grams

The **Emerson Roadhouse** is a tactical knife, with almost graceful lines. The blade has a pointed tanto-tip while the primary edge has a slight 'belly', making it more usable than conventional tanto-blades. You immediately notice the exceptional ergonomics when you hold the knife. The shape of the handle with the large finger groove in the front will nicely fill up your hand. The thickness of the handle is also just right, to make sure your fingers fall around it perfectly. A large pocket knife that is comfortable to use.

 ## The Emerson Wave opener

 You can open the Emerson Roadhouse in two ways: you can open it with the thumb disc on the back of the spine, or you can use the characterizing Emerson Wave. This is the little wave on the spine of the blade. You can use this 'hook' to open the pocket knife when you take it from your pocket. You pull the knife back after which the wave will get caught behind the edge of your pocket opening the blade. Also important: it also functions as a bottle opener. Cheers.

 ## The handle

 The handle is made from G10 with a structure that offers you a massive amount of grip. This pocket knife almost sticks to your hand. The shape of the edge also contributes to this. Both with the blade at the top and at the base of your fist the Roadhouse offers you a wonderful ergonomic grip. Inside the handle you can find titanium liners. These liners keep the weight of this large pocket knife relatively low.

 ## The blade

 The blade on the Emerson Roadhouse is made from 154CM steel. This type of steel was designed in the seventies for turbine blades of jet engines, but today it is better known as a premium type of steel. The blade is enhanced with a regular V-grind, but only sharpened on one side. According to Emerson this should make sharpening in the field a lot easier. The clip point blade is razor-sharp. The blade is enhanced with a stunning stonewashed finish and when opened a linerlock will keep the blade in place.

 ## History of Emerson Knives

 The foundations for Emerson Knives as we know them today date back to 1979. That was when Ernest Emerson started producing custom knives. Because of his background as a soldier and martial arts instructor he had a clear idea of what a knife should look like. In 1996 Emerson decided to scale up his production to make sure more people could start using his knives. He founded Emerson Knives and started producing pocket knives and fixed knives on a larger scale. Today *Emerson Knives*  is a family company that focuses on details, but perhaps most importantly: it is a company that puts the use of a knife and the user first.



Emerson Roadhouse BT pocket knife

brand

colour

handedness

blade_finish

handle_material

knife_edge_type

knife_bladeshape

pocketknife_steel

pocketknife_onehanded

value_blade_length

expectedRestockDate

legal_agecheck_key

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

General information

value_blade_height

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge.  This may deviate from the manufacturer's specification.

Cutting edge length

value_blade_thickness

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

value_opened_length

value_weight

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

multitool_tools

opening_system

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

pocketknife_lock

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

sharpening_type

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Emerson Roadhouse BT pocket knife

Emerson Roadhouse BT pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Emerson Roadhouse BT pocket knife

Relevant topics

6 reasons to keep a knife handy

Buying guide pocket knives

Spyderco replaces the CPM S30V steel from the Paramilitary 2 and Para 3 for CPM S45VN steel

Shipping

Payment methods