Name: Robert Herder Yatagan Utility knife 1809.600.02
Brand: Robert Herder
SKU: RH1809.600.02
Availability: BackOrder
Rating: 4.5 (8 reviews)

Blade length: 15.6 cm
Total length: 26.7 cm
Weight: 55 gram


The name Yatagan is a reference to a Turkish scimitar. It is clear where this reference comes from. The curved blade of this kitchen knife is suitable for rocking while cutting. As the blade is long and not too high, this knife is very easy and light to handle. Of course this utility knife features a traditional thin blade. The famous ' Solinger Dünnschliff '. Combined with the carbon steel, which is commonly used by Robert Herder, also this knife has the fantastic cutting qualities known to this brand.  
  


The down side of carbon steel, is that it's not rust resistant. That means that this knife should be treated with care. Cleaning and drying immediately after use, increases the life span. If you treat this knife in the right way then this is a sublime utility knife.  
   

  

Robert Herder knives are largely hand-made, which may cause for a longer delivery time. This can also mean that the delivery time on our website can be subject to change. When the knife is ‘in stock’ we have received it from the factory and can ship it out to you.

Robert Herder Yatagan Utility knife 1809.600.02

not_replaced_in

sharpening_type

handle_material

kitchen_knife_type

notforsale

kitchen_steel

blade_finish

value_number_of_knives

value_blade_length

legal_agecheck_key

delivered_as_a_set

knife_edge_type

value_blade_thickness

value_weight

brand

handedness

value_overall_length

expectedRestockDate

sharpening_angle

value_blade_height

blade_feature

colour

videos

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Yagatan maakt het snijden van vlees, vis en groenten tot een feest. Het mes is niet te groot en is erg licht in gewicht. Met name mijn vrouw is daar erg blij mee omdat het ook in haar kleine hand zich vaardig laat hanteren. De punt bleek zeer handig bij het uitsnijden van de botten van lamsboutschijven. 

Mooi vormgegeven ligt goed in de hand snijdt goed.houdt de scherpte goed vast.

Ik was al fan van de molenmesjes, en dit is z'n grote broer. Hiermee splijt ik zonder probleem hele bloemkolen, rode kolen, en grote ronde broden. Daarnaast heeft het mes een mooi machete-uiterlijk.

Ik heb dit mes al jaren en er is voor mij  geen betere.
Vooral de kromming is erg handig,ik snijd er alles mee.
Het mes is superscherp je kan er zelfs diepvries spul mee snijden evenals groenten vlees brood enz enz.
Ik heb dit mes dan ook aan mijn zoon kado gedaan.
Jammer dat dit mes niet erg bekend is wand hij is erg goed en erg betaalbaar voor een mes van deze kwaliteit.
Ik kan hem iedereen aanraden

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

Reviews for Robert Herder Yatagan Utility knife 1809.600.02

Reviews for Robert Herder Yatagan Utility knife 1809.600.02

Reviews

Average rating

Reviews for Robert Herder Yatagan Utility knife 1809.600.02