Name: Fallkniven NL4 Frej
Brand: Fällkniven
SKU: FKNL4
Price: 417.64 EUR
Availability: BackOrder
Rating: 9.14286 (7 reviews)

Fällkniven NL5 Idun Damast Cowry X

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

Fällkniven F1 Pro Elmax, Standard Version, F1PROELMAX outdoor knife

Fallkniven NL2 Odin

Fällkniven S1 Pro outdoor knife, S1PRO10

productlabel

Fällkniven S1x Forest Knife, outdoor knife

Fallkniven NL3 Njord

Fällkniven F1L3Gmm Next Generation Limited Edition outdoor knife

KA-BAR Becker BK72 Stonewashed CPM S35VN Knivesandtools Exclusive, survival knife

Fällkniven A1 Pro outdoor knife, A1PRO10

Fallkniven S1, blank blade, zytel sheath

Lionsteel M4 Walnut MagnaCut M4-MC-WN, Knivesandtools Exclusive, fixed knife

strike_price

Fallkniven A1, leather sheath

KA-BAR BK62 Kephart bushcraft knife

Benchmade Leuku 202 bushcraft knife

Fällkniven F1x Elmax Pilot Knife, outdoor knife

Bark River Aurora II CPM 3V Red & Black SureTouch G10, bushcraft knife

Victorinox Outdoor Master Mic Large 4.2261 outdoor knife

Fällkniven SK2 Embla hunting knife

Bark River Ultra Lite Field Knife CPM 3V Green Canvas Micarta, bushcraft knife

Fällkniven F1L3GBM Next Generation JAS Limited Edition

Ballistol maintenance oil, 50 ml

Knivesandtools #EveryDayCloth, micro-fibre cloth

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools #OneKnifeStand, knife stand

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Work Sharp Multi-Sharpener Ken Onion Edition

Edge Pro Apex 4, sharpening system

Skerper Pocket Strop STP002, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Shapton Glass Stone HR sharpening set grit 500, 2000 and 16000, 50408

Work Sharp Guided Field Sharpener, WSGFS221

Brommeland Gunleather Micro strop, pre-loaded 15-4MS-PL

Wera Bit-Check 12 metal 1, 12-piece bit set, 5057424001

Wera Bit-Check 30 Metal 30-piece bit set, 5057434001

Fällkniven Flipstone sharpening stone, FS4

Fällkniven CC4 ceramic pocket sharpening stone

Fallkniven Diamond Ceramic Whetstone DC521

Fallkniven Diamond Ceramic Whetstone DC4

Fallkniven Diamond Ceramic Whetstone DC3

TSPROF Blitz 360 Complete sharpening system

High quality outdoor knife with classical design. Blade length: 13,0 cm


Frej was the god of peace in the Norse sagas, but also a god of fertility and prosperity.  

He was the king of trolls and elves, beings that until quite recently were a reality in the old farming society.  

Mod. NL4 Frej is not merely a beautiful and compact knife - since the blade is in laminate VG10 steel, convex ground, the knife is relatively strong.  

Frej is a slender, well balanced knife of the highest quality, completely handmade, like the larger models.  

A friend for the future.  
  


Fallkniven NL4 Frej

brand

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_length

value_blade_thickness

expectedRestockDate

colour

zm_series

handedness

videos

valueForMoneyStars

meetsExpectationsStars

authorCity

En av bästa jaketknivar som jag hade i mitt liv. Vikt, storlek och skärpa är i toppklass!

orderNumber

reaction

reviewDate

top product. so beautiful and very well finished. I will probably not use it and just leave it in my drawer.

Prachtig mes. Ik had er veel over gelezen, net als over de meer populaire Idun. 
Mooie vorm met een ingetogen clip point. Stevig, maar niet te dik, convex geslepen lemmet dat zeer scherp is. 
Het (prachtige) handvat is voor mij groot genoeg, het ruikt naar leer en is bedoeld voor gebruik. 
De schede past goed bij de stijl van de Northern Light serie en is van stevig leer.
De Frej is een goed bruikbaar mes voor kamperen en jacht. Het is ook geschikt voor voedselbereiding. 
Hoewel de NL4 een brede 'partial tang' heeft die tot de schroef in de 'pommel' doorloopt,  zou ik met de Frej geen boomstammen klieven of omhakken, daar zijn desnoods andere en grotere messen voor, of nóg beter, een bijl en een (opvouwbare) zaag. 
Wat mij betreft is de Frej een aanrader,


Ik was al jaren op zoek naar een goed mes en met deze keuze ben ik meer dan tevreden, stevige prijs, maar wel een zeer goede kwaliteit en ligt ook fijn in de hand.
Ook de service ed. (met o.a. de bestelling, bezorging) is zeer goed verlopen. 

Ik zou zeggen: "Keep up the good work!"

Super snel geleverd echt dank ! , handvat vond ik iets te slank(grote handen), is moeilijk voor te stellen van een plaatje.
Stevige prijs.
Verders wel super afgewerkt en kwaliteit, blijft goed scherp na 3 weken vakantie.

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Reviews for Fallkniven NL4 Frej

Reviews for Fallkniven NL4 Frej

Reviews

Average rating

Reviews for Fallkniven NL4 Frej