DMT DiaSharp Bench Stone 6x2 D6X one-sided, extra coarse

The DMT DiaSharp Bench Stone 6x2 D6X one-sided, extra coarse is a compact sharpening stone. The extra coarse stone is perfect when removing rust or when sharpening tools. Diamond-coated sharpening stones quickly remove material and, depending on the grain size sharpen your knives razor-sharp. The advantage of diamond sharpening stones is that they don't have to be lapped. With this DiaSharp stone the diamond particles are added to a 6 mm thick steel sheet. As such the flatness of this sharpening stone is guaranteed.

DMT DiaSharp Bench Stone 6x2: grain size

The grain size of a diamond-coated stone and a water stone cannot easily be compared. This is because the construction and materials used are substantially different. With a water stone, the sharpening grains are incorporated in the stone. These grains are also released from the stone during use and become some kind of sharpening paste. With a diamond-coated stone, the diamonds are secured in the surface of the stone.

The DMT DuoBase met MagnaBase-adapter makes sharpening much more stable and easy. You can use the DMT sharpening stones with or without water. The advantage of sharpening with water is that the stone is lubricated and the sharpening residue is removed. Never use oil, always water. It is also good to know that a diamond-coated sharpening stone must be sharpened as well. A new sharpening stone removes quite a lot of material. Only after 5 to 10 knives does the stone have its final effect. The stone comes with a rubber base.