The Fenix PD36R is a compact and rechargeable flashlight that is mostly suited for EDC use, outdoor activities and tactical purposes. With a maximum light output of 1600 lumens and a beam distance of 283 meters the PD36R is a real hulk. Because of its compact size you can easily take the flashlight with you. Make it disappear in your pocket or attach the flashlight, with the help of the included pocket clip, on your belt or bag.
The Fenix E01 V2.0 is a small keychain flashlight that is, despite its size, still quite powerful. The light has a maximum light output of 100 lumens and a beam distance of no less tham 35 meters. And all with one AAA battery! The light only weighs 20 grams, including the battery. This light is also waterproof to a depth of 2 metres. As such it is the perfect light to accompany your keys or as a nice addition to your EDC pouch. As such you will always have it close!
Length: PD36R: 13.6 cm. Length: E01 V20: 6.6 cm.
How to use the Fenix PD36R
The tactical switch of the Fenix PD36R has a momentary-on function. Hold the tactical switch down and the light will momentarily turn the highest mode on. As soon as you completely press down the switch it will stay on. You simply select the desired light mode with the stainless steel switch.
Is the light turned on? As soon as you press the MODE button, the light will temporarily function in the stroboscope mode. To deactivate it you press the MODE button again. Thanks to the memory of the light it will always start with the mode last used. This does not only apply to the stroboscope mode.
How to use the E01 V2.0
The light is very easy to use. Simply turn the head of the light and the Fenix E01 will start in the lowest mode. Prefer a higher mode? Repeat this process until you have reached the desired light mode. To turn the light off you turn the head in the other direction.
Charging the Fenix PD36R V2.0
The head of the light contains a USB-C port. A rubber cover ensures that the head is protected against water and dust. A such the USB-port also cannot be damaged.
Want to check the battery status while charging the light? A red-green charging indicator shows you the charging status. Each time you turn the light on the battery indicator will show you the current battery voltage. As such you can find out how full or empty the battery is. This indictor only works in combination with the Fenix 21700 Li-Ion battery.
Light modes for the Fenix PD36R
- Turbo: 1600 lumens, burn time of approx. 2:50 hours
- High: 800 lumens, burn time of approx. 5:49 hours
- Medium: 350 lumens, burn time of approx. 8:24 hours
- Low: 150 lumens, burn time of approx. 26 hours
- Eco: 30 lumens, burn time of approx. 115 hours
- Strobe: 1600 lumens
Light modes for the Fenix E01 V2.0
High: 100 lumens, burn time of approx. 50 minutes
Medium: 25 lumens, burn time of approx. 4:50 hours
Low: 5 lumens, burn time of approx. 25 hours
Accessories for the Fenix PD36R
The Fenix PD36R comes with one Fenix 21700, 5000mAh Li-Ion battery, USB-C charging cable, wrist strap, spare O-ring and a nylon holster.
Accessories for the Fenix E01 V2.0
The light comes with an AAA battery, keychain, manual and warranty.
As you use the turbo mode for a longer period of time the light will heat up. When the light reaches a temperature of 60 degrees Celsius or higher, the light will automatically drop the amount of lumen to lower the temperature.