The Leatherman Tread LT is the most practical multi-tool to always carry with you. One you will never forget because you want to carry it with you. It looks good, it is very wearable and offers practical tools. This high-tech tool is well designed and perfectly put together. Style and function complement each other and make this a real must have. Thanks to its polished appearance the Tread can truly be called a piece of jewellery. This LT-version is slightly slimmer than the original Tread.
This multi-tool has ten chains with practical tools. In total this multi-tool bracelet has 29 functions!
Tools
Please note: This is the Leatherman Tread for the European market with tools according to a metric standard.
The Tread is comprised of chains. Every chain has a name, Link #. The name and which tools the chain has, can be found on the inside of the chain. Below you can read which chain comes with the metric Tread and we describe every chain in clockwise direction.
"Clasp" (lock) (45mm)
- Bottle opener
- 1/4" bit driver (male)
- R2 square key (Roberson)
"Link 4" full-size shackle (20mm)
- Sim card key
- Cutting hook
- Glass breaker
- Can be used as Leatherman bit driver
"Link 19" full-size chain(20mm)
- T27 Torx-key
- 6mm wrench
- T30 Torx-key
- Can be used as a Leatherman bit driver
"Link 8" full-size chain (20mm)
- 3/16” Hex-key
- Key for oxygen tank
- 1/4” Hex-key
- Can be used as a Leatherman bit driver
"Link 10" full-size chain (20mm)
- 3mm Hex-key
- 8mm wrench
- 4mm Hex-key
- Can be used as a Leatherman bit driver
"Link 1"Leatherman branded half-long chain(12.5mm)
- 3/32" flat screwdriver
- 1/8" flat screwdriver
"Link 17" full-size chain(20mm)
- #1PZ philipshead screwdriver (Pozidriv)
- 11mm wrench
- #2PZ philipshead screwdriver (Pozidriv)
"Link 6" full-size chain(20mm)
- 5/16” flat screwdriver
- 3/8” wrench
- 1/4” flat screwdriver
"Link 9" full-size chain(20mm)
- 5mm Hex-key
- 10mm wrench
- 6mm Hex-key
"Link 15" full-size chain(20mm)
- #1-2 philipshead screwdriver
- 7 mm wrench
- 3/16" flat screwdriver
- Can be used as a Leatherman bit driver
By removing chains you can fit the bracelet around any wrist. The space between the chains is about 6.5 mm.
The screws that keep the chains together have a flat screw head. This makes it easy to detach the chains without special tools. The steel of those screws was selected to withstand sideways force. The force you use when you tighten a bolt.
The Tread is a high achiever
A Leatherman Wave multi-tool made it all the way into space to the International space station ISS. But it is not allowed to bring a multi-tool on a plane. Because most multi-tools have sharp tools. The Leatherman Tread is travel friendly as Leatherman likes to put it. So the multi-tools are no longer just for astronauts but also for people with both legs on the ground.
With the Tread you will always be prepared when you go out.