Name: Böker Model 10 Limited 42 114653MZ pocket knife, Les Voorhies design
Brand: Böker
SKU: BO114653MZ
Availability: BackOrder

Handle/blade: mokuti and elforyn/CPM154
Blade length: 7.9 cm 
Weight: 105 grams 


The **Böker Model 10 Limited42**  is a stunning gentleman's knife for daily uses, designed by Les Voorhies. An amazing knife to carry with you on a daily basis. Only 20 pieces of this limited edition knife were produced.




The CPM 154 steel sheepsfoot blade is enhanced with a nice hollow grind. It moves from the heel to the tip of the blade. As such the blade is only 0.5 mm thick directly behind the edge. For a production knife this is incredibly thin. As such the Model 10 is great to use. Because of the stonewashed finish traces of use hardly stand out. As such you don't have to be afraid of using this stunning knife.



The handle is made from Elforyn. A synthetic material that looks like ivory. Below you find titanium liners with a titanium liner lock. Just outside the G10 you can see the titanium sticking out very subtly. A nice detail that contributes to the stylish look and feel of the Model 10. The bolsters are made from Mokuti, a damascus from different types of titanium. This is the 42 edition which means you can only open it with two hands. As such it is, for instance, legal in Germany.




Böker Model 10 Limited 42 114653MZ pocket knife, Les Voorhies design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Böker Model 10 Limited 42 114653MZ pocket knife, Les Voorhies design