Name: Böker Stockman Anniversary Edition 115985 pocket knife
Brand: Böker
SKU: BO115985
Price: 119.95 EUR
Availability: BackOrder

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Knivesandtools Knife Pouch Black, by Maxpedition

Böker Knife Vault Large 09BO154 knife bag

Böker Presentation Pad 099912 display mat

Knivesandtools #OneKnifeStand, knife stand

Skerper Basic sharpening set 180/600/1000/3000 with diamond sharpening steel, SH006

Skerper Pocket Strop STP002, stropping paddle

Böker 090062 storage case for pocket knives

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Böker Knife Vault Small 09BO153 knife bag

Lansky Masters Edge Sharpener, MEDGE1

Nano-Oil 10w maintenance oil 8cc/8ml

Zippo Classic 204-000243, Brushed Solid Brass, lighter

Zippo Classic Armor 162-000003, Brushed Chrome, lighter

Fallkniven Diamond Ceramic Whetstone DC4

DMT Aligner ProKit sharpening system

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

Böker Plus Tango Bar 09BO900 pry bar, Peter Fegan design

Handle/blade: nickel silver and curly birch/440C
Blade length: 7.5 cm
Weight: 65 grams

This **Böker Stockman Anniversary Edition Green 115985** is a classic slipjoint pocket knife. A beautiful slim gentleman's knife, of which only a limited amount were produced. The Stockman pattern is a real Traditional. This is a very nice edition of this pattern. In between the nickel silver bolster you will find a curly birch wood inlay. It is a type of wood enhanced with a stunning pattern. This wood is stabilized with green resin to make sure it is almost as strong as plastic.

 In the middle of the blade on the left side you will find a large 'Tree Brand' logo. An old school logo Böker used often in the past. Now it is back, gilded and all. Like the gilded logo in the handle. The blade is made from Böhler 440C-steel. A fine, stainless type of steel that is easy to sharpen.

 This is the Anniversary Edition to honour Böker's 150th anniversary as a knife manufacturer. Only 150 pieces were made and each has a number.



Böker Stockman Anniversary Edition 115985 pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

traditionalmodel

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Böker Stockman Anniversary Edition 115985 pocket knife

Böker Stockman Anniversary Edition 115985 pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Stockman Anniversary Edition 115985 pocket knife

Böker Stockman Anniversary Edition 115985 pocket knife

Böker Stockman Anniversary Edition 115985 pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Stockman Anniversary Edition 115985 pocket knife

Relevant topics