Name: Cold Steel Counter Point 1 10ACLC
Brand: Cold Steel
SKU: CS10ACLC
Availability: BackOrder
Rating: 9 (6 reviews)

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Skerper Pocket Strop STP002, stropping paddle

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Work Sharp Angle Set knife sharpener, WSBCHAGS

Fallkniven Diamond Ceramic Whetstone DC4

Cold Steel Special Forces Shovel - 92SF

legal_agecheck_key

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Lansky BladeMedic

Skerper Basic sharpening pen with a diamond steel, SO001

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

Cold Steel Kudu 20KK pocket knife

Cold Steel Finn Bear

Lansky Pocket Ceramic Sharpening System

Lansky Masters Edge Sharpener, MEDGE1

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Handle/blade: Griv-Ex/CTS-BD1
Blade length: 9,6 cm
Weight: 136 gram

Cold Steel Counter Point 1 10ACLC

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Un peu Grand.  Grip bizarre au toucher. Fermeture un peu difficile par moment. Rien à dire sur la lame. Tranchant parfait.  L ergot de fixation pour la poche est bien trop serré.  Il va falloir l enlever .

Ik gebruik het mes voor edc gebruik en daar is hij erg geschikt voor.
Ligt erg goed in de hand, en hij komt erg scherp vanuit de doos, je kunt je er mee scheren.
De service van knives And tools was weer goed 



Goed in de hand liggende folder, meer als back up dan edc.
Ben wel fan van hun nieuwe staalsoorten, heb het gevoel dat ze minder vlug roesten dan de gestonewashste aus8.
Lemmet is langs één kant geslepen, andere kant is sterk uitgedund 

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Cold Steel Counter Point 1 10ACLC

Cold Steel Counter Point 1 10ACLC

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Cold Steel Counter Point 1 10ACLC

Cold Steel Counter Point 1 10ACLC

Cold Steel Counter Point 1 10ACLC

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Cold Steel Counter Point 1 10ACLC

Relevant topics