Fenix BC30 bike light

The Fenix BC30 V2.0 is a professional bicycle light that was specifically designed for mountain biking. Because you can choose from six different modes, of which the maximum light output is no less than 2200 lumens, you stand out and you will always light up the path ahead. The BC30 V2.0 is enhanced with a special double beam in order to see everything in front of you, but also to make sure others see you. With the special individual wireless button you can easily switch between modes. You attach on your bicycle where you feel you can reach it best. As such you don't have to take your hands of the handlebars to control your light. In addition to being easy to use this light is waterproof and can handle quite a lot. It is namely made from strong aluminium and can handle a fall from up to 1.5 metres. The light works with two 18650 batteries, or four CR123A batteries (batteries are not included).

How to use the BC30 V2.0

You can control this light in two ways: with the button on top of the light itself, or with the included, individual button you can mount to your bicycle. For both buttons the controls are the same: you hold it 0.5 seconds to turn the light on, afterwards you switch between modes by clicking the button, starting with the lowest mode. The wireless button also has an additional Burst button to make sure you can use the maximum output (2200 lumens) for up to 30 seconds.

Light modes for the Fenix BC30 V2.0

• Burst: 2200 lumens
• High: 1500 lumens, burn time of approx. 2:20 hours
• Medium: 600 lumens, burn time of approx. 6 hours
• Low: 200 lumens, burn time of approx. 16 hours
• Eco/EDC: 50 lumens, burn time of approx. 50 hours

Accessories for the Fenix BC30 V2.0

This light comes with bicycle holder, battery for the button (CR1632 button cell), wireless button, additional o-ring, wide and narrow straps for the holder, manual and warranty.

Intelligent protection

If you use the turbo mode for a longer period of time the light will start to heat up. When the light reaches a temperature of 60°C or higher the light will automatically reduce the amount of lumen to also reduce the temperature.