Leatherman Skeletool Denim multitool

The Leatherman Skeletool is an incredibly cool multi-tool. Made to be as light as possible, while it has been enhanced with almost all tools you could possibly need on a daily basis.

From the outside you can easily open the pocket knife with one hand. When opened a linerlock will neatly keep the blade in place. As a result it will never close when you don’t want it to. The frame on the Skeletool has been enhanced with round cut-outs in various places. As a result the knife is very light. This special edition has been enhanced with a denim-coloured finish.

At the end of the tool you will find a bit holder. Standardly the Leatherman Skeletool comes with a No.1 and No.2 Philips head bit. On the side of the frame you will find a 1/4“ and 3/6“ flathead screwdriver. As a result you will immediately have a couple of fitting screwdrivers at hand that will enable you to carry out a lot of daily tasks. Good to know is that the bit holder has a clamp with a spring that helps keep the bit in place. So you have to press this clamp down to change the bit. The standard Leatherman bits (from, amongst others, the bit kit) easily fit inside.

Leatherman Skeletool tools

• Needle nose pliers
• Pliers
• Hard wire cutters
• Wire cutters
• Knife (partially serrated)
• Snap hook with bottle opener
• Bit holder with bits