The versatile LedLenser P7R Core has a powerful output of 1400 lumens. This is combined with cutting-edge techniques. It is, for instance, enhanced with the Smart Light Technology that enables you to program the entire light. Do you only want to use the highest and lowest mode? Don't worry, you can easily set that up! The Advanced Focus System ensures that you can quickly switch from a broad beam to a sharp focus. The special lens ensures that the light will not flicker. Simply great! In addition, you can dim this light to make sure you always have the right amount of light at your disposal.
Because of the focus system it was initially very difficult for LedLenser to make sure the lights were really waterproof. With the special Flex Sealing Technology, however, this is now possible! This flex seal moves with the light, protecting it from water and dust (IP68)!
Charging the LedLenser P7R Core.
The flashlight comes with rechargeable 21700 Li-Ion battery (4800 mAh, 3.7V). You simply charge the light with the special magnetic charging system. You simply click it on the lamp and it is good to go! The advantage is that you never have to worry about USB ports wearing out. You can, however, only charge this light with the special included charger.
Light modes for the LedLenser P7R Core
- Boost: 1400 lumens
- Power: 1000 lumens, burn time of approx. 2 hours
- Medium: 440 lumens, burn time of approx. 4 hours
- Low: 15 lumens, burn time of approx. 90 hours
- Strobe, Position, S.O.S., Blink: 1400 lumens
If you use the turbo mode for a longer period of time the light will start to heat up. If the light becomes too hot the light will automatically reduce the amount of lumen to reduce the temperature as well.