Name: Mcusta MC-142 Ripple, ebony
Brand: Mcusta
SKU: MC142
Availability: BackOrder
Rating: 10 (4 reviews)

Handle/blade:ebony/VG10
Blade length 7,2 cm
Weight: 89 gram

Mcusta MC-142 Ripple, ebony

knife_edge_type

sharpening_type

handle_material

notforsale

opening_system

zm_series

pocketknife_onehanded

blade_finish

value_blade_length

pocketknife_lock

legal_agecheck_key

material_sheath

value_blade_thickness

value_multitool_tools_number

value_opened_length

value_weight

brand

handedness

not_replaced_in

knife_bladeshape

expectedRestockDate

sharpening_angle

value_blade_height

multitool_tools

knife_sheath

colour

pocketknife_steel

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Een sjieke herenmes. Bij de meeste zakmessen van Mcusta bestaat de rug uit standoffs. Deze is mooi dicht met een stalen backspacer. Ze hebben bij dit model geen damast gebruikt. Zou iets mooier zijn. De groeven aan de handvat geeft je extra grip. Ook is de overloop van staal naar hout erg mooi.

Un objet à utilisé avec parcimonie selon besoin en toute quiétude.


het product is geweldig, de service belabbert, na 800 euro gespendeerd te hebben bij knivesandtools, was er bij een nieuwe aankoop niet te praten over een voordeeltje.
je moest het maar doen met wat de website verkondigde.
conclusie einde verhaal v.w.b. mijn status als klant, jammer want de producten deugen, de verkopers niet!

Jos Konings

Mooi afgewerkt mesje, vlijmscherp en gaat vlot open en dicht zonder het minste spoor van speling. Valt wat kleiner uit dan ik verwachte maar het is een juweeltje. Prachtig mesje.

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Mcusta MC-142 Ripple, ebony