Silky Gomtaro Pro Sentei 240-8-14 replacement blade, fine and coarse

This is the replacement blade for the Silky Gomtaro Pro Sentei. With a large flat-blade screwdriver you can easily replace the blade.

This Gomtaro Pro Sentei is a special edition of the Gomtaro models. After all, it has two types of serrations on one blade. In the front you have fine serrations for the finer jobs. Think of pruning branches that have grown closely together. The fine part has 14 teeth per 30 mm. At the back of the blade you will have a larger part with coarse serrations. With these you can easily saw through fresh wood. Here you will find 8 teeth per 30 mm. The fine-coarse ratio is approximately 1/3e - 2/3e.

A Silky saw blade is very thin and hard. As a result it is amazing to work with. However, when you use it you need to pay extra attention to the blade. Why? This saw is a pull saw which means that the blade will not bend when you use it. Make sure that when the blade moves forward it is never forced because you will risk breaking it. Always lift the weight off the blade to release the saw. As with any saw: let the saw do the work and don’t force it. As a result you won’t get tired as fast and you won’t wear out the saw. The way you hold the handle determines how much wood you cut. Holding your hands close to the blade means that you put less pressure on the blade. As a result you can saw more precisely and more focused. When you hold the back of the handle the pressure will increase making you saw faster but less precise.

If a Silky saw has been adorned with an impulse hardening symbol it means that the saw has been impulse hardened and that it cannot be sharpened with a file. You can see that the saw has been impulse hardened when you look at the blade and see that the tips of the serrations are black.

The Silky blade needs to be kept clean to make sure it stays in great shape. Resin dissolves when it comes into contact with olive oil which makes it an effective, environmentally-friendly product you can use to clean the blade. Please note: aggressive detergents can damage the rubber handle.

When you don’t use the saw you should put it in its storage case and store it somewhere dry.