Wicked Edge Pro-Pack III sharpening system

notforsale

not_replaced_in

msrp_price

Marttiini Lynx Black Edition 131013, Brut De Forge 80CrV2, Black Birch outdoor knife

productlabel

legal_agecheck_key

Marttiini Condor Trailblazer 185018T Martef Stainless, rubber, bushcraft knife

Marttiini Lumberjack 127012 Dark Birch Carbon, outdoor knife

Chris Reeve Sebenza 31 Large Plain Glass Blasted Insingo L31-1685 pocket knife

strike_price

Spartan Harsey Folder 3.25 SF10C-COMPASS, Stonewashed CPM MagnaCut, Compass Green/Bronze Anodized Titanium pocket knife

Fenix E12 V3.0 EDC flashlight, 200 lumens

Skerper Arkansas Natural Bench Stone NABE40, Translucent Arkansas

Victorinox Pioneer X Alox Limited Edition 2025 0.8231.L25, Stone Red, Swiss pocket knife

Clip And Carry Kydex Sheath Leatherman Surge, Carbon Fiber Red LSURGE-CF-RED belt holster

Leatherman ARC 833076 Black Silver, Black DLC CPM MagnaCut, multi-tool

Mora Companion MG carbon, green

Chris Reeve Small Sebenza 31 MagnaCut Drop Point, Plain, Glass Blasted, S31-1644, pocket knife

Edge-On-Up PT50A sharpness tester

Fiskars X13 Ultra Light Hiking Axe, hand axe

Kershaw Iridium 2038TI, CPM 20CV, Titanium, DuraLock, Knivesandtools EU Exclusive, pocket knife

Marttiini Tundra 352010 CB Natural Curly Birch, outdoor knife

Spartan Harsey Folder 3.25 SF10C-BL-PVD-FR, Stonewashed CPM MagnaCut, Grey Titanium pocket knife

Wusthof Silverpoint  Confectioner's knife with one-piece ergonomic handle
Handle/ Blade: Structured black nylon & Stainless Steel
Blade length: 23 cm / 9 inch


Wusthof Silverpoint Confectioner's knife with one-piece ergonomic handle.

Wüsthof Silverpoint Confectioner's Knife 23 cm (9")

brand

colour

series

handedness

blade_finish

blade_feature

kitchen_steel

handle_material

knife_edge_type

sharpening_type

sharpening_angle

delivered_as_a_set

kitchen_knife_type

value_number_of_knives

value_weight

value_blade_height

value_blade_length

value_overall_length

value_blade_thickness

expectedRestockDate

videos

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

Wüsthof Silverpoint Confectioner's Knife 23 cm (9")

Wüsthof Silverpoint Confectioner's Knife 23 cm (9")

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Wüsthof Silverpoint Confectioner's Knife 23 cm (9")

Wüsthof Silverpoint Confectioner's Knife 23 cm (9")

Wüsthof Silverpoint Confectioner's Knife 23 cm (9")

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Wüsthof Silverpoint Confectioner's Knife 23 cm (9")

Relevant topics