Name: Zero Tolerance 0392BLK Factory Custom
Brand: Zero Tolerance
SKU: ZT0392BLK
Availability: BackOrder
Rating: 6 (1 reviews)

Kizer Feweed KI3694A3 Polished DLC CPM S45VN, Titanium Camo Carbon 80's Inlay, pocket knife

notforsale

legal_agecheck_key

not_replaced_in

productlabel

msrp_price

Chris Reeve Sebenza belt sheath, brown

strike_price

Demko Knives MG AD20S Shark-Lock, CPM 20CV Clip Point MGAD20S-TAN Tan G10, pocket knife

Demko Knives MG AD20S Shark-Lock, CPM 20CV Clip Point MGAD20S-BLUE2 Blue G10, pocket knife

Rick Hinderer Jurassic Spearpoint 20CV Stonewash Bronze Translucent Green G10 pocket knife

Flytanium Spyderco Shaman Scales, Carbon fibre

Grailer 4 OD Green G10 pocket knife, Michel Timmermans design

Wicked Edge Pro-Pack III sharpening system

Opinel Pro No°125,  002437 steak knife set 4-piece

Spyderco Sage 5 CPM REX 121 C123GBORP Burnt Orange G10 pocket knife

Edge Pro Matrix stone, 250 grit

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

SOG PowerPint PP1001 multi-tool

Big Idea Design Ti Lookout Fixed Blade TI-GR-LO Green, fixed knife, Mak Kelsay design, Limited Edition

Case Knives Bowie Black Synthetic Handle 00286 bowie knife

Chef'sChoice Edge Crafter, diamond sharpening steel

Condor Atrox Knife 1814-10.8HC machete 61719

CRKT CEO 7096 pocket knife, Richard Rogers design

Eden Kanso Aogami, Chef's knife 23 cm

Edge Pro Matrix stone, 4000 grit

Handle/blade: titanium/CTS-204P
Blade length: 9.2 cm
Weight: 166 g

Zero Tolerance 0392BLK Factory Custom

sharpening_type

handle_material

opening_system

pocketknife_onehanded

blade_finish

value_blade_length

pocketknife_lock

knife_edge_type

value_blade_thickness

value_opened_length

value_weight

brand

handedness

knife_bladeshape

expectedRestockDate

value_blade_height

knife_sheath

colour

pocketknife_steel

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Ce couteau, souffre malheureusement de plusieurs problèmes.
Il n'est pas aiguisé correctement et ne coupera rien sans une intervention pour affuter sa lame.

La visserie n'est pas homogène. Deux types de vis avec des aspects légèrement différents ont été utilisés pour fixer le manche. 

J'ai remarqué un très léger jeu latéral au niveau de la lame. Ce n'est pas grand chose mais pour une Edition limitée c'est inacceptable. 

Enfin ZT ne livre pas ce couteau dans sa belle boite   "Limited Edition " mais dans une boite ordinaire. La version internationale de ce couteau doit se contenter d'une boite ordinaire. Cette explication a été donnée par le service après vente de ZT que j’ai contacté par mail !



designer

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Zero Tolerance 0392BLK Factory Custom

Zero Tolerance 0392BLK Factory Custom

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Zero Tolerance 0392BLK Factory Custom

Zero Tolerance 0392BLK Factory Custom

Zero Tolerance 0392BLK Factory Custom

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Zero Tolerance 0392BLK Factory Custom

Relevant topics