Name: Böker Leopard-Damascus III Gold 110227DAM Limited Edition pocket knife
Brand: Böker
SKU: BO110227DAM
Price: 899 EUR
Availability: BackOrder

Böker Tirpitz Damast Gold 42 Limited Edition 110196DAM pocket knife

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

Handle/blade: aluminium and damasteel/damasteel
Blade length: 9.6 cm 
Weight: 150 grams

The **Böker Leopard-Damascus III Gold 110227DAM** is a very special pocket knife. The blade is made from stainless damascus steel. We have more of those, you might say. You are right. The unique aspect, however, is that this damascus steel was forged from the barrel of a German Leopard tank. Steel which was even gilded afterwards. You don't see that very often.



The Leopard was introduced in 1965 and was produced in Western Germany by Porsche. A tank that was built on firepower with an impressive 105 mm cannon. Parts of the barrel were turned into a 300 layer damascus steel by blacksmith Andreas Henrichs. The pattern is a 'Great Diamonds' design, with diamond-shaped layers. The handle is enhanced with a damascus steel inlay. The rest of the handle is made from aluminium.



You open the Böker Leopard-Damascus III with the flipper or the double thumb studs. When opened a steel liner lock locks the blade.



Only a limited amount of the Böker Leopard Damascus III Gold 110227DAM were produced, and it is shipped in a stunning display case.




Böker Leopard-Damascus III Gold 110227DAM Limited Edition pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Böker Leopard-Damascus III Gold 110227DAM Limited Edition pocket knife

Böker Leopard-Damascus III Gold 110227DAM Limited Edition pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Böker Leopard-Damascus III Gold 110227DAM Limited Edition pocket knife

Böker Leopard-Damascus III Gold 110227DAM Limited Edition pocket knife

Böker Leopard-Damascus III Gold 110227DAM Limited Edition pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Böker Leopard-Damascus III Gold 110227DAM Limited Edition pocket knife

Relevant topics