Name: Böker Plus Exskelibur I Framelock Steel 01BO137 pocket knife, Mike Skellern design
Brand: Böker
SKU: BO01BO137
Price: 79.9 EUR
Availability: BackOrder
Rating: 8 (1 reviews)

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knives and Tools Knife Cleaning Mat, rubber

Work Sharp Ken Onion Edition Elite Knife & Tool Sharpener Mk.2 WSKTS-KO2-ELT, electric knife sharpener

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper paddle strop Viking, rough, stropping paddle

Böker Plus K.I.D. Cal .50, 09BO072 Black, tactical pen

Böker Plus CID cal .45 Gray 09BO086 tactical pen

Böker Plus CID cal .45 Black 09BO085 tactical pen

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1164H, black, 100 ft (30.48 m)

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Böker Hamburger Pouch 90086, EDC-pouch

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Böker Pure Camellia oil 04BO175, 100ml

Nano-Oil 10w maintenance oil 8cc/8ml

Böker Plus Trucker Cap 09BP0009

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #MatchPatch, #01 OG-Green, patch

Handle/blade: G10 and stainless steel/D2
Blade length: 9.0 cm
Weight: 95 grams

The **Böker Plus Exskelibur I Framelock Steel 01BO137** is a slim pocket knife for daily use, designed by Mike Skellern. This South-African designer is known for his slim pocket knives enhanced with front flipper. As such you can also easily and quickly open this pocket knife with the front flipper.



The front flipper is a part of the blade that sticks out of the handle when closed. Due to the subtle grip serrations, also known as jimping, you have enough grip with your thumb or index finger to launch the blade. The ball bearings around the pivot ensure that the blade moves smoothly.



The handle is made from G10 and stainless steel. The show side is made from G10 and the lock side from stainless steel. The steel side is enhanced with a solid framelock to make sure the blade stays in place when opened.



The blade is made from D2. A tough type of steel that retains its sharpness well. For years D2 has been a reliable choice for different tools. The only thing you need to take into account is that D2 isn't completely stainless. So clean it after use and occasionally add a drop of oil. The result is that the Böker Plus Exskelibur I Framelock will last for years to come!




Böker Plus Exskelibur I Framelock Steel 01BO137 pocket knife, Mike Skellern design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Ich habe dass Messer gekauft da ich das alte Modell mit 440C Klinge habe. Mit dieser war ich aber nicht zufrieden weswegen ich mir die D2 Variante geholt habe.

Nun zum Fazit.
Die Klinge ist super. Sehr gute Schärfe. Sehr gute Schnitthaltigkeit. Die Verarbeitung ist wie gewohnt sehr gut. Der Linerlock schließt leicht und sicher.
Abzüge gibt es persönlich für mich beim Aufbau. Das ganze Messer ist sehr flach gebaut im Gegensatz zu seinem Vorgänger. Daher ist der Preis für meinen Geschmack zu hoch. Aber so ist und war es schon immer bei Böker.

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Böker Plus Exskelibur I Framelock Steel 01BO137 pocket knife, Mike Skellern design

Böker Plus Exskelibur I Framelock Steel 01BO137 pocket knife, Mike Skellern design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Plus Exskelibur I Framelock Steel 01BO137 pocket knife, Mike Skellern design

Böker Plus Exskelibur I Framelock Steel 01BO137 pocket knife, Mike Skellern design

Böker Plus Exskelibur I Framelock Steel 01BO137 pocket knife, Mike Skellern design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Plus Exskelibur I Framelock Steel 01BO137 pocket knife, Mike Skellern design

Relevant topics