Name: Böker Tirpitz Damast Gold 42 Limited Edition 110196DAM pocket knife
Brand: Böker
SKU: BO110196DAM
Price: 899 EUR
Availability: BackOrder

Böker Leopard-Damascus III Collection 110237DAM Limited Edition pocket knife

notforsale

legal_agecheck_key

not_replaced_in

Work Sharp Professional Precision Adjust Elite Knife Sharpener WSBCHPAJ-PRO-ELT, sharpening system

Böker P08 Damascus 121515DAM Limited Edition dagger knife

Böker Tirpitz Damast Wood 42 Limited Edition 110197DAM pocket knife

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

productlabel

Skerper Paddle Strop STP001, stropping paddle

Spyderco Sharpmaker, 204MF

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper paddle strop Viking, rough, stropping paddle

Böker Plus K.I.D. Cal .50, 09BO072 Black, tactical pen

Böker Plus CID cal .45 Gray 09BO086 tactical pen

Böker Plus CID cal .45 Black 09BO085 tactical pen

Robert Herder maintenance set 920000500

Knives and Tools Knife Cleaning Mat, rubber

Skerper Maintenance Oil Pen MA002, 10 ml

Flitz knife maintenance set, 4-piece

Böker Hamburger Pouch 90086, EDC-pouch

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools Leather Sheath, Black, Large

Handle/blade: aluminium and walnut/carbon damascus
Blade length: 9.9 cm
Weight: 165 grams

The **Böker Tirpitz Damast Gold 42 Limited Edition 11019DAM** is an exclusive and special pocket knife. The name Tirpitz might sound familiar, especially when you think of the history books about the Second World War. Tirpitz is the name of the sister ship of the Bismarck. To this day, the largest European warship ever built. This ship sank off the coast of Norway in 1944. Divers resurfaced parts of the ship's special steel for Böker, and Böker asked Andreas Henrich's to turn it into carbon damask steel. That steel was used for this knife. A piece of history within your reach. To make this knife even more special, the blade is also gilded with real gold. The screws and pocket clip are also gold plated. An exclusive finish for a special pocket knife

 The handle is made from aluminium and has German walnut wood inlays. The name Tirpitz is engraved in the walnut wood inlays, and on the lock side you will find a unique number for this knife. In honour of the special history of this knife, and the idea behind it that we have been living in peace in Europe for many years now, Böker donates 10 euros per sold copy to the War Graves Commission. Only a limited amount of this knife are produced. While stocks last.

 This is the '42' edition: with a two-handed opening to comply with German knife legislation.



Böker Tirpitz Damast Gold 42 Limited Edition 110196DAM pocket knife

handle_material

opening_system

zm_series

pocketknife_onehanded

blade_finish

value_blade_length

pocketknife_lock

knife_edge_type

value_blade_thickness

value_multitool_tools_number

value_opened_length

value_weight

brand

handedness

knife_bladeshape

expectedRestockDate

sharpening_angle

value_blade_height

multitool_tools

knife_sheath

colour

sharpening_type

pocketknife_steel

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Böker Tirpitz Damast Gold 42 Limited Edition 110196DAM pocket knife

Böker Tirpitz Damast Gold 42 Limited Edition 110196DAM pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Tirpitz Damast Gold 42 Limited Edition 110196DAM pocket knife

Böker Tirpitz Damast Gold 42 Limited Edition 110196DAM pocket knife

Böker Tirpitz Damast Gold 42 Limited Edition 110196DAM pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Tirpitz Damast Gold 42 Limited Edition 110196DAM pocket knife

Relevant topics