Name: Chris Reeve Small Sebenza 21 Striped Platan S21-1234
Brand: Chris Reeve Knives
SKU: CRS21-1234
Availability: OutOfStock

Handle/blade: titanium and striped platan/CPM S35VN
Blade length: 7.6 cm
Weight: 80 grams

The **Chris Reeve Small** is the "baby" brother of the Sebenza Large, but is certainly not inferior to its big brother. It goes without saying that the quality of the finish is exceptional. There are, of course, other manufacturers who produce similar knives, but we haven't come across such a high level of quality in such an austere looking pocket knife.

 The hollow grind blade is enhanced with a convex edge which was applied by hand, and is made from S35VN, an advanced powder metallurgical type of steel. The knife can easily be opened with one hand thanks to the anodized titanium thumb knob, after which, when opened, it is locked by a rock-solid frame lock.

 The handle, made from top-quality titanium, is partially sandblasted and partially polished. The same applies to the blade: The flat parts have a stonewashed finish and the hollow grind is satinised. It gives this Sebenza with wooden inlay a slightly more fancy look and feel compared to its 'ordinary' brothers. Like all Chris Reeve Knives the Sebenza is razor-sharp.

 This edition is enhanced with stunning Striped Platan inlays. This is platan wood with a striped pattern. You expect there to be some texture in the wood, but it is very smooth. Of course the wood is stabilized to last a lifetime. The inlays don't only look amazing, they also offer you a good grip. In addition, with this Sebenza the thumb stud isn't blue but gold-coloured

 **Scope of delivery**

 
 * Chris Reeve Sebenza 21 Small pocket knife
 *  [Chris Reeve fluorinated grease](%3C!--#URL:CR-GREASE--%3E)
 * Allen key
 * Chris Reeve maintenance cloth
 * [Chris Reeve leather pouch (small)](/en/pt/-chris-reeve-calfskin-pouch-for-small-sebenza-or.htm)
 
 Please note: wood is a natural product. As a result the look could differ per knife. As such each inlay and each Sebenza with inlays is unique!



Chris Reeve Small Sebenza 21 Striped Platan S21-1234

handle_material

notforsale

opening_system

zm_series

pocketknife_onehanded

blade_finish

value_blade_length

pocketknife_lock

legal_agecheck_key

material_sheath

knife_edge_type

value_blade_thickness

value_multitool_tools_number

value_opened_length

value_weight

brand

handedness

not_replaced_in

knife_bladeshape

expectedRestockDate

sharpening_angle

value_blade_height

multitool_tools

knife_sheath

colour

sharpening_type

pocketknife_steel

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Chris Reeve Small Sebenza 21 Striped Platan S21-1234