Name: CRKT 1706K Ruger Follow-Through Black pocket knife
Brand: CRKT
SKU: CK-1705K
Availability: BackOrder

Cold Steel SR1 Lite 62K1 pocket knife

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

CRKT M21 G10 Large Folder - Spear Point - M21-04G

Real Steel Sacra, 7711N Natural Micarta, Stonewashed K110 pocket knife

Cold Steel Air Lite Drop Point 26WD pocket knife

Böker Magnum Toxicofera 01SC005 pocket knife

Real Steel Crusader 3701 Light Grey 7442 pocket knife, Poltergeist design

Kershaw Lucid 2036, Assisted pocket knife

Kershaw Shuffle DIY 8720 pocket knife with bit holder

ESEE Avispa pocket knife, stonewashed D2 blade, Black handle BRK1302

Fox Chilin FX-530-CF Satin M398, Carbon Fiber pocket knife, Jesper Voxnaes design

CRKT Pilar 5311 pocket knife, Jesper Voxnaes design

CRKT Pilar III 5317 pocket knife, Jesper Voxnaes design

CRKT Pilar III D2 5317D2 pocket knife, Jesper Voxnaes design

CRKT Pilar IV, Black pocket knife, Jesper Voxnaes design

SOG Altair XR Canyon Red Stone Blue 12-79-02-57 pocket knife

Civivi Baby Banter C19068S-1 Black G10, Stonewashed pocket knife, Ben Petersen design

productlabel

strike_price

Ballistol maintenance oil, 50 ml

Knivesandtools #EveryDayCloth, micro-fibre cloth

Nano-Oil 10w maintenance oil 8cc/8ml

Skerper Pocket Strop STP002, stropping paddle

Skerper Maintenance Oil Pen MA002, 10 mL

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

Work Sharp Angle Set knife sharpener, WSBCHAGS

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

CRKT Iota Black 9085K, Tom Stokes design

CRKT Knife Maintenance Tool 9704, Tom Stokes design

CRKT Hex Bit Driver Tool Roll 9911 screwdriver set

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

CRKT Squid pocket knife stonewash-2490

CRKT Hex Bit Driver, Brass, 9911-2, Scout Tools design

Wera Bit-Check 12 metal 1, 12-piece bit set, 5057424001

Wera Bit-Check 30 Metal 30-piece bit set, 5057434001

Fallkniven Diamond Ceramic Whetstone DC4

DMT Diafold two-sided sharpening stone, FWEE

DMT Diafold two-sided sharpening stone, FWFC

Work Sharp Guided Field Sharpener, WSGFS221

CRKT 9100KC, Eat'N Tool, Black

CRKT 9110C, Eat'N Tool XL, bead blast

Handle/blade: FRN/8Cr13MoV Blade length: 9.8 cm 
Weight: 149 gram

CRKT 1706K Ruger Follow-Through Black pocket knife

brand

colour

zm_series

handedness

blade_finish

handle_material

knife_edge_type

knife_bladeshape

pocketknife_steel

pocketknife_onehanded

value_blade_length

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

value_blade_height

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

value_blade_thickness

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

value_opened_length

value_weight

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

opening_system

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

pocketknife_lock

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

sharpening_type

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

CRKT 1706K Ruger Follow-Through Black pocket knife

CRKT 1706K Ruger Follow-Through Black pocket knife

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

CRKT 1706K Ruger Follow-Through Black pocket knife

Relevant topics

Spyderco Para 3 vs Benchmade 945 Mini Osborne

Benchmade vs Zero Tolerance

Shot Show 2019: the newest Gerber pocket knives