Name: CRKT Tighe Breaker 1110 fixed knife, Brian Tighe design
Brand: CRKT
SKU: CK-1110
Availability: BackOrder

Chris Reeve Large Sebenza/Umnumzaan Lanyard with bead liberty/silver COM-7118

notforsale

not_replaced_in

Chris Reeve Small Inkosi Insingo SIN-1022 pocket knife

legal_agecheck_key

Knivesandtools #EveryDayCloth, micro-fibre cloth

Skerper Basic sharpening pen with a diamond steel, SO001

Skerper Pocket Strop STP002, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

productlabel

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

Work Sharp Angle Set knife sharpener, WSBCHAGS

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

CRKT Iota Black 9085K, Tom Stokes design

CRKT Knife Maintenance Tool 9704, Tom Stokes design

CRKT Hex Bit Driver Tool Roll 9911 screwdriver set

Lansky Masters Edge Sharpener, MEDGE1

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

CRKT Squid pocket knife stonewash-2490

CRKT Hex Bit Driver, Brass, 9911-2, Scout Tools design

Work Sharp Multi-Sharpener Ken Onion Edition

DMT Aligner ProKit sharpening system

Work Sharp Guided Field Sharpener, WSGFS221

Fallkniven Diamond Ceramic Whetstone DC4

CRKT 9100KC, Eat'N Tool, Black

CRKT 9110C, Eat'N Tool XL, bead blast

Handle/blade: paracord/8Cr13MoV
Blade length: 10,8 cm
Weight: 100 grams


CRKT Tighe Breaker 1110 fixed knife, Brian Tighe design

brand

colour

blade_finish

handle_material

knife_edge_type

material_sheath

knife_bladeshape

pocketknife_steel

value_length

value_blade_length

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

value_blade_height

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_thickness

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

value_weight

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

sharpening_angle

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

sharpening_type

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

CRKT Tighe Breaker 1110 fixed knife, Brian Tighe design

CRKT Tighe Breaker 1110 fixed knife, Brian Tighe design

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

CRKT Tighe Breaker 1110 fixed knife, Brian Tighe design

Relevant topics

ESEE Buying Guide: which ESEE knife is the right one for me?

Batoning with a fixed knife

Taking care of your fixed knife