Name: Rick Hinderer XM-18 3.5" Bowie S35VN, black G10 pocket knife
Brand: Rick Hinderer Knives
SKU: HRK-XM18-35-BOW-BK
Availability: OutOfStock

Zero Tolerance 0350TS Folder, plain edge

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

strike_price

Spyderco Tasman Salt 2 C106PYL2 Plain Edge pocket knife, yellow

Ballistol maintenance oil, 50 ml

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Knivesandtools Knife Pouch Wolf Grey, by Maxpedition

Knivesandtools Knife Pouch Black, by Maxpedition

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools #OneKnifeStand, knife stand

Skerper Maintenance Oil Pen MA002, 10 ml

Shapton Glass Stone sharpening set grit 500, 2000 and 8000, 50308

DMT Aligner ProKit sharpening system

Work Sharp Multi-Sharpener Ken Onion Edition

Skerper Pocket Strop STP002, stropping paddle

Skerper Basic sharpening pen with a diamond steel, SO001

Rick Hinderer Knives Armorer’s Tool XM18, steel

Rick Hinderer One Hole Filler Tab Copper

Rick Hinderer Knives Holey Pocket Clip, titanium bronze

Rick Hinderer One Hole Filler Tab Titanium, stonewashed

Rick Hinderer One Hole Filler Tab Titanium, stonewashed blue

Rick Hinderer XM18 3,5” scale, Smooth Natural Canvas Micarta

Rick Hinderer Complete Copper KIT - XM-18 3.5 in.

Rick Hinderer One Hole Filler Tab Titanium, stonewashed bronze

Rick Hinderer XM18 3,5” scale, Smooth Green Canvas Micarta

Rick Hinderer XM18 3,5” scale, Smooth Burgundy Canvas Micarta

Rick Hinderer Complete Brass Hardware Set, XM18 3.5”

Rick Hinderer One Hole Filler Tab Brass

Rick Hinderer Investigator Pen Brass/Messing, tactical pen

Rick Hinderer Investigator Pen Copper/copper, tactical pen

Rick Hinderer Investigator Pen Titanium Bronze, tactical pen

Wera Bit-Check 12 metal 1, 12-piece bit set, 5057424001

Wera Bit-Check 30 Metal 30-piece bit set, 5057434001

DMT Diamond sharpening stone, fine, W6F

DMT Diamond sharpening stone, coarse, W6C

Fallkniven Diamond Ceramic Whetstone DC4

DMT Diafold two-sided sharpening stone, FWFC

Handle/blade: titanium en G10/CPM S35VN
Blade length: 8,9 cm
Weight: 154 gram

Rick Hinderer XM-18 3.5" Bowie S35VN, black G10 pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Rick Hinderer XM-18 3.5" Bowie S35VN, black G10 pocket knife

Rick Hinderer XM-18 3.5" Bowie S35VN, black G10 pocket knife

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Rick Hinderer XM-18 3.5" Bowie S35VN, black G10 pocket knife

Rick Hinderer XM-18 3.5" Bowie S35VN, black G10 pocket knife

Rick Hinderer XM-18 3.5" Bowie S35VN, black G10 pocket knife

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Rick Hinderer XM-18 3.5" Bowie S35VN, black G10 pocket knife

Relevant topics