Name: Ruike L32-G Criterion Green pocket knife
Brand: Ruike
SKU: RUL32-G
Price: 39.95 EUR
Availability: BackOrder

Casstrom Overstrike Guard for axes

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

Knivesandtools EDC pouch

Ledlenser P7 Core flashlight

strike_price

Ledlenser P7R Core rechargeable flashlight

productlabel

Ledlenser P7R Work rechargeable flashlight, 1200 lumens

Maglite MAG-TAC LED R rechargeable LED-torch, crowned bezel black

Maxpedition Riftcore V2.0 Backpack Black 23L RFCBLK, tactical backpack AGR

Nitecore BP20 backpack black

Ruike L32-B Criterion Black pocket knife

Ruike L32-N Criterion Brown pocket knife

Victorinox Pioneer Alox Green 0.8201.24R4.KTE1 Knivesandtools Edition, Swiss pocket knife

Cold Steel Hudson Bay Tomahawk 90QA

Cold Steel Trail Hawk Ax

KA-BAR Wrench Knife 1119 neck knife

Victorinox Walker Red 0.2313 84 mm Swiss pocket knife

Ruike LD32-B Trekker pocket knife, black

Ballistol maintenance oil, 50 ml

Skerper Basic sharpening pen with a diamond steel, SO001

Skerper Pocket Strop STP002, stropping paddle

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

Work Sharp Angle Set knife sharpener, WSBCHAGS

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Leatherman Brewzer

Lansky Masters Edge Sharpener, MEDGE1

Handle/blade: G10/Sandvik 12C27
Blade length: 8.5 cm
Weight: 155 grams

Ruike L32-G Criterion Green pocket knife

brand

colour

zm_series

handedness

blade_finish

handle_material

knife_edge_type

knife_bladeshape

pocketknife_steel

pocketknife_onehanded

value_blade_length

expectedRestockDate

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

value_blade_height

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

value_blade_thickness

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

value_opened_length

value_weight

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

multitool_tools

opening_system

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

pocketknife_lock

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

sharpening_angle

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

sharpening_type

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Ruike L32-G Criterion Green pocket knife

Ruike L32-G Criterion Green pocket knife

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Ruike L32-G Criterion Green pocket knife

Relevant topics

9 knives any collector SHOULD own!

Which Victorinox Swiss pocket knife will suit me best?

Buying Guide Daily Customs: which Daily Customs scales do I need?