Name: Viper Larius Green G10 V5960GG pocket knife, Fabrizio Silvestrelli design
Brand: Viper
SKU: VPV5960GG
Availability: BackOrder

Amefa Oxford 1860 24-piece cutlery set

notforsale

not_replaced_in

legal_agecheck_key

productlabel

msrp_price

Armatus Carry Architect sheath for the ESEE Izula/Izula II, hunter orange

Armatus Carry Architect sheath for the Fällkniven F1x, black

Bestech Nogard BT2105D Black Titanium, Red Marble Carbon fibre pocket knife, Kombou design

Case Muskrat Rough Black Synthetic, 18232, MUSKRAT SS pocket knife

Case Trapper Embellished Smooth Natural Bone, Sportsman Series Gift Set, 60585, 6254 SS pocket knife

Chris Reeve Sebenza 31 Large Plain L31-1000 pocket knife

Cold Steel Bowie Bushman with firesteel, 95BBUSK

Cold Steel Mini Tuff Lite 20MTGD OD Green pocket knife

Combekk cast iron frying pan, 28 cm, green

Daily Customs 91.3 Cross Inlay 2.0, DSC Titanium P10012463

ESEE Passport Case Black, without Izula-pen PASSP-CASE-B-X

Estwing Camper's Axe black, EB-25A

strike_price

Fenix TK32 LED-torch

KA-BAR Squadron Patch KBPATCH2

Kansept Model 6 K1022A3 Black Titanium pocket knife, Nick Swan design

KME CBN Stropping Paste, cubic boron nitride, 0.1 micron, 7ml

Ballistol maintenance oil, 50 ml

Knivesandtools #EveryDayCloth, micro-fibre cloth

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools Knife Pouch Wolf Grey, by Maxpedition

Skerper Maintenance Oil Pen MA002, 10 ml

Schmuckatelli Joe Skull Bead 3/16" Hole Pewter

Work Sharp Angle Set knife sharpener, WSBCHAGS

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Fallkniven Diamond Ceramic Whetstone DC4

Work Sharp Multi-Sharpener Ken Onion Edition

TSPROF Blitz Complete sharpening system

Spyderco Sharpmaker, 204MF

Handle/blade: G10/M390
Blade length: 8.3 cm
Weight: 100 grams


The **Viper Larius** is a tough and cool pocket knife, designed by Fabrizio Silvestrelli. This Italian designer is known for his outspoken designs. The Larius is a flipper pocket knife. This means that you can easily and effortlessly open it with the flipper. Ball bearings around the pivot ensure that the Larius runs smoothly.


The sleek lines of the Larius remind us of a Lamborghini. Also a great example of Italian design. The handle has been enhanced with extensive milling work. The pocket clip is also milled from a block of titanium, and not cut from a sheet.


Subtle colour accents around the pivot, the backspacer and the pocket clip give the knife a little extra. Especially when combined with the milled-out details. When opened the blade is blocked by a liner lock.


The *Harpoon style* blade is neatly rounded off at the spine. In terms of steel one chose Böhler M390 steel. An Austrian type of super steel which retains its sharpness well. For the tip Viper has chosen a facet in the grind. This gives the blade and the protrusions on the spine its ‘fast’ look.




Viper Larius Green G10 V5960GG pocket knife, Fabrizio Silvestrelli design

brand

colour

handedness

blade_finish

handle_material

knife_edge_type

knife_bladeshape

pocketknife_steel

pocketknife_onehanded

value_blade_length

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

value_blade_height

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

value_blade_thickness

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

value_opened_length

value_weight

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

multitool_tools

opening_system

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

pocketknife_lock

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

sharpening_angle

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

sharpening_type

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Viper Larius Green G10 V5960GG pocket knife, Fabrizio Silvestrelli design

Viper Larius Green G10 V5960GG pocket knife, Fabrizio Silvestrelli design

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Viper Larius Green G10 V5960GG pocket knife, Fabrizio Silvestrelli design

Viper Larius Green G10 V5960GG pocket knife, Fabrizio Silvestrelli design

Viper Larius Green G10 V5960GG pocket knife, Fabrizio Silvestrelli design

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Viper Larius Green G10 V5960GG pocket knife, Fabrizio Silvestrelli design

Relevant topics