Name: WE Knife 606C, spearpoint pocket knife
Brand: WE Knife
SKU: WK606C
Price: 308.66 EUR
Availability: BackOrder

Kershaw Leek 1660OR plain edge, orange

notforsale

legal_agecheck_key

not_replaced_in

msrp_price

Ontario RAT-2 D2 desert tan, plain edge black, 8830DT

Steel Will Cutjack C22-1BL Blue FRN, D2 blade pocket knife

Steel Will Modus F25-12 Green FRN, D2 blade, pocket knife

Work Sharp Professional Precision Adjust Elite Knife Sharpener WSBCHPAJ-PRO-ELT, sharpening system

Knives and Tools Knife Cleaning Mat, rubber

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

productlabel

WE Knife Baculus, TP-07B tactical pen

Skerper Paddle Strop STP001, stropping paddle

WE Knife Baculus, TP-07A tactical pen

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper paddle strop Viking, rough, stropping paddle

Spyderco Sharpmaker, 204MF

Civivi C20048-3 Key Bit Container Blue Titanium

Civivi C20048-2 Key Bit Container Bronze Titanium

Civivi Click CA-01B Flamed Carabiner

Zippo Street Chrome Knivesandtools HAKD-exclusive, lighter

WE Knife Syrinx TP-04A EDC pen, Blue

Knivesandtools 550 Paracord Type III Military Spec RG1164H, black, 100 ft (30.48 m)

Skerper Maintenance Oil Pen MA002, 10 ml

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Nano-Oil 10w maintenance oil 8cc/8ml

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Handle/blade: titanium/carbonfiber/CPM S35VN Blade length: 8,9 cm Weight: 104gram

WE Knife 606C, spearpoint pocket knife

value_multitool_tools_number

sharpening_type

handle_material

opening_system

pocketknife_onehanded

blade_finish

value_blade_length

pocketknife_lock

knife_edge_type

value_blade_thickness

value_opened_length

value_weight

brand

handedness

knife_bladeshape

expectedRestockDate

sharpening_angle

value_blade_height

multitool_tools

knife_sheath

colour

pocketknife_steel

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

WE Knife 606C, spearpoint pocket knife

WE Knife 606C, spearpoint pocket knife

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife 606C, spearpoint pocket knife

WE Knife 606C, spearpoint pocket knife

WE Knife 606C, spearpoint pocket knife

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife 606C, spearpoint pocket knife

Relevant topics