Name: WE Knife Bishop 903B pocket knife, blue
Brand: WE Knife
SKU: WK903B
Availability: BackOrder

Cold Steel SR1 pocket knife 62L

notforsale

not_replaced_in

legal_agecheck_key

Ardennes Coticule 712 BBW, Belgian Blue sharpening steel, 20 cm

msrp_price

Amare Knives Pocket Peak grey, pocket knife

Armatus Carry Architect sheath for the ESEE Izula/Izula II, gunmetal grey

Civivi Utility Blades CA-03A replacement blades

Cold Steel Mini Tac Tanto 49HTF neck knife

Deejo Tattoo 37g, Coralwood, Lucky Skull 1CB041 pocket knife

Daily Customs 91.2+ Plain, Brass P10008596 Victorinox scales

Fontenille Pataud Laguiole Magnum waiter's corkscrew white bone, LMAGOS

Kizer Ginesis KI4518 pocket knife, Gage design

strike_price

Kizer Vanguard Lan, micarta, N690, V4577N2 pocket knife

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools Knife Pouch Black, by Maxpedition

 Fenix E18R rechargeable LED-flashlight

productlabel

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

WE Knife Gesila A-08A Black, titanium pry bar

WE Knife Gesila A-08B Grey, titanium pry bar

Work Sharp Angle Set knife sharpener, WSBCHAGS

Nano-Oil 10w maintenance oil 8cc/8ml

WE Knife Syrinx TP-04B EDC pen, Grey

Work Sharp Multi-Sharpener Ken Onion Edition

TSPROF Blitz Complete sharpening system

Lansky Masters Edge Sharpener, MEDGE1

Handle/blade: titanium/M390
Blade length: 8.9 cm
Weight: 110 grams

The **WE Knife Bishop** is a robust pocket knife. The Bishop is an in-house design. This means that the knife was designed by the WE Knife team. As such you see different design elements such as the oval-shaped thumb hole, something that was often used on previous WE models. 

The handle is made from titanium enhanced with a carbon fibre handle. The titanium bolsters and the blade have a rough stonewashed finish. This finish properly hides scratches. A great choice since the Bishop was made to be used. You immediately notice this. Once in hand you feel that the WE Knife Bishop is solidly constructed. The ergonomics are also perfect and there are no hot-spots, sharp or angular edges. Your index finger will automatically fall in the finger groove at the bolster. As such you have a lot of control over the knife and it won't suddenly slip from your hand during use. A nice detail is the carbon fibre that folds around the titanium liners. As such you will only see the titanium liner construction when you look at the knife from up close. The backspacer is also made from carbon fibre. As such it appears as if the handle is completely made from carbon fibre.

 You can easily open the Bishop with the thumb hole or the flipper. Both options work smoothly thanks to the use of ceramic ball bearings in the handle. The blade is made from M390 steel. A phenomenal type of steel that is perfect for an EDC-knife.



WE Knife Bishop 903B pocket knife, blue

brand

colour

handedness

blade_finish

handle_material

knife_edge_type

knife_bladeshape

pocketknife_steel

pocketknife_onehanded

value_blade_length

expectedRestockDate

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

value_blade_height

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

value_blade_thickness

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

value_opened_length

value_weight

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

multitool_tools

opening_system

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

pocketknife_lock

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

sharpening_angle

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

sharpening_type

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

WE Knife Bishop 903B pocket knife, blue

WE Knife Bishop 903B pocket knife, blue

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife Bishop 903B pocket knife, blue

Relevant topics

Fox Knives expansion: 25 new knives

New: Chris Reeve Sebenza 31!

Grailer in the German Messer Magazin