Name: WE Knife MRF 925A Marble Carbon fibre, Polished Beadblast slipjoint pocket knife, Markus Reichart design
Brand: WE Knife
SKU: WK925A
Price: 226.83 EUR
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knives and Tools Knife Cleaning Mat, rubber

Work Sharp Multi-Sharpener Ken Onion Edition

WE Knife Baculus, TP-07B tactical pen

legal_agecheck_key

WE Knife Baculus, TP-07A tactical pen

Skerper Paddle Strop STP001, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Spyderco Sharpmaker, 204MF

productlabel

Civivi C20048-1 Key Bit Container Grey Titanium

Civivi C20048-3 Key Bit Container Blue Titanium

Civivi C20048-2 Key Bit Container Bronze Titanium

WE Knife Syrinx TP-04C EDC pen, Black

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1164H, black, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Handle/blade: carbon fibre/CPM S35VN
Blade length: 8.7 cm
Weight: 95 grams

The **WE Knife MRF 925A** is a large slipjoint pocket knife, designed by Markus Reichart. The name 'MRF' stands for *Markus Reichart Folder*. The remarkable thing about the design is that it looks like a fixed knife. The flowing line moving from the spine of the handle towards the blade is a sight for sore eyes.

 You open this pocket knife with two hands. There is quite a lot of resistance on the back spring to make sure it doesn't accidentally open in your pocket. A solid slipjoint keeps the blade in place when opened. Because of the way the back spring rests on the back of the blade there is extra resistance for closing. One of the stronger slipjoints we know. Feels a little safer.

 The handle is made from marbled carbon fibre. A technical material that still looks very organic. It weighs next to nothing and feels great in hand. The blade is made from CPM S35VN. A strong American type of steel that retains its sharpness well, is tough, but also easy to sharpen.

WE Knife MRF 925A Marble Carbon fibre, Polished Beadblast slipjoint pocket knife, Markus Reichart design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

WE Knife MRF 925A Marble Carbon fibre, Polished Beadblast slipjoint pocket knife, Markus Reichart design

WE Knife MRF 925A Marble Carbon fibre, Polished Beadblast slipjoint pocket knife, Markus Reichart design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife MRF 925A Marble Carbon fibre, Polished Beadblast slipjoint pocket knife, Markus Reichart design

WE Knife MRF 925A Marble Carbon fibre, Polished Beadblast slipjoint pocket knife, Markus Reichart design

WE Knife MRF 925A Marble Carbon fibre, Polished Beadblast slipjoint pocket knife, Markus Reichart design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife MRF 925A Marble Carbon fibre, Polished Beadblast slipjoint pocket knife, Markus Reichart design

Relevant topics