Z-saw Tuck-In 210 Fine, 18002, pruning saw

notforsale

not_replaced_in

Fiskars Xtract branches saw SW73

legal_agecheck_key

strike_price

ANV A200, G10, Alock, ANVA200-001 pocket knife

Z-saw Tuck-In Carpentry 240, 18004, woodworking saw

Fiskars Xtract branches saw SW75

Z-saw Tuck-In 240 Coarse, 18003, pruning saw

Hultafors Trekking axe H 008 SV, 840066

Silky Gomboy 240-10 medium, black

Brisa Trapper 95 - N690Co Scandi - Green Canvas Micarta - 2017

Real Steel Bushcraft Plus Convex 3720 bushcraft knife

productlabel

Eden Kanso Aogami 2040-418 kiritsuke 18 cm

Silky Gomboy 210-10 medium, black

Felco 600 tree saw with foldable saw blade

KA-BAR Becker BK2 Companion, polyester sheath

Ontario RAT-1 SP plain edge, 8848

Hultafors Flint FS fire steel, 380280

LionSteel M5 CPM 3V, Green Canvas Micarta, Knivesandtools Exclusive survival knife

LionSteel M5 CPM 3V, Natural Canvas Micarta, Knivesandtools Exclusive survival knife

LionSteel B41 Green Canvas Micarta G10 B41-CVG bushcraft knife

Real Steel Bushcraft III Convex Ebony Mosaic 3726E Knivesandtools Exclusive bushcraft knife

Foldable pruning saw with very coarse serrations
Length saw blade: 21 cm

The **Z-saw Tuck-In 210 coarse pruning saw** is a foldable pruning saw with very coarse serrations of 8.5 teeth per inch. As such this saw is perfect when cutting fresh wood. The serrations of this Z-saw saw are hardened to make sure they retain their sharpness for a long time.


This Tuck-in 210 Coarse saw is foldable. As such you can easily store it in your toolbox. As such the teeth are properly protected. This saw can also be set in two different positions, allowing to always work comfortably. Did the saw become blunt in time? You can easily replace the saw blade.


This Z-saw saw is a pull saw, which means that the saw makes pulling movements. It is important to know that you need to let the saw do the work. You don't have to apply too much force, not even with pushing movements. As such this saw is amazing to use. Don't force the saw when it is stuck. If you do your saw blade can be exposed to sidewards forces and damage or even break. Remove the weight to release the saw.


## About Z-saw


Z-saw saws are produced in Miki, Japan. This is the heart of the Japanese metal industry. Here they have known for years how metal works! They combine ancient knowledge with modern techniques to end up with the best possible types of steel. As such these Japanese pull saws retain their sharpness for a really long time. A Z-saw saw will last a lifetime and is very efficient in use. 



Z-saw Tuck-In 210 Coarse, 18001, pruning saw