Name: 2-pc walnut tip Fontenille Pataud steak knives
Brand: Fontenille Pataud
SKU: FPLTC2NO
Availability: OutOfStock
Rating: 9 (4 reviews)

High quality Laguiole steak knife. Length 9 inch , weight 90 grams,  Z40C13 stainless steel .


High quality Laguiole steak knife.
1st choice patterned walnut ( gun-stock selection) 7 mm thick scales with traditional shepherd's cross layed in.  


Varnished wooden box ( Made in France ) included.

2-pc walnut tip Fontenille Pataud steak knives

brand

colour

handedness

blade_finish

blade_feature

kitchen_steel

set_inclusive

handle_material

knife_edge_type

sharpening_type

sharpening_angle

delivered_as_a_set

kitchen_knife_type

value_number

value_number_of_knives

notforsale

value_weight

value_blade_height

value_blade_length

value_overall_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Prachtige messen, snijden héél goed en liggen goed in de hand. Glijden wel af en toe van de bordrand door het gewicht, maar dat is een "ervaringskwestie" van goed neerleggen.

Een zeer mooie set en mooi op te bergen in de meegeleverde houten doos. 
Voelt goed in de hand en is een zeer mooi ontwerp.

Tevens erg tevreden met de levering, de volgende dag in huis :) 

GOEDE EN SNELLE Aflevering. GOED PRODUKT.

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

table_cutlerly

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

extra_acc

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

2-pc walnut tip Fontenille Pataud steak knives