Name: Benchmade Redoubt Black 430BK-02 pocket knife
Brand: Benchmade
SKU: BE430BK-02
Price: 199.95 EUR
Availability: BackOrder
Rating: 10 (1 reviews)

The **Benchmade Redoubt 430BK-02** is part of Benchmade's Black Class series. The knife is robust and incredibly versatile. Made for first responders or EDC fanatics looking for a reliable knife. For situations where a normal pocket knife is not sufficient.

The Grivory handle is a striking feature. This is a very lightweight plastic that is seriously strong for its weight. Nothing new, you might be thinking. And that's true. Until you look a little closer! The black handle scale is integral. This means that it is made from one piece of Grivory. As a result, the texture also runs over the back of the handle, giving you great grip on the handle. The texture sits right in the palm of your hand, in fact.

The blade is made from CPM D2 steel. This is a tough tool steel that retains its sharpness well and is also easy to sharpen. However, be careful with moisture and acids: D2 is not completely stainless. Benchmade has tackled this problem by applying a black Cerakote coating. The blade is locked in its open position by an Axis lock mechanism. The knife features steel liners at the front of the handle for additional strength around the lock.

You can carry the Benchmade Redoubt securely in your trouser pocket with the deep-carry pocket clip. This means the knife is quickly available, but not very noticeable.

Benchmade Redoubt Black 430BK-02 pocket knife

knife_edge_type

Benchmade Redoubt Black 430SBK-02 serrated pocket knife

colour

handedness

blade_finish

opening_system

handle_material

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

legal_agecheck_key

notforsale

not_replaced_in

expectedRestockDate

videos

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Schnelle Lieferung. Gutes Messer. Erfüllt alle Erwartungen. Luft gut in der Hand . Öffnet und schließt hervorragend. Super Klinge. Schneidet alles, was man schneiden kann 😁. Hoher Preis. Alles in allem super Messer! 

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Benchmade Redoubt Black 430BK-02 pocket knife