Name: Casström No. 06 Classic Wood Carving Knife 15006 High Carbon
Brand: Casström
SKU: CM15006
Price: 39.99 EUR
Availability: BackOrder

Work Sharp Precision Adjust Elite WS09DX066 sharpening system

notforsale

not_replaced_in

Knives and Tools Knife Cleaning Mat, rubber

Work Sharp WSKTS2 Knife & Tool Sharpener MK2

BeaverCraft Wood Carving Blocks BW10, 10-piece set

BeaverCraft Wood Carving Blocks BW16, 16-piece set

BeaverCraft Wood Carving Blocks BW12, 12pcs

Skerper Pocket Strop STP002, stropping paddle

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Skerper Basic sharpening pen with a diamond steel, SO001

BeaverCraft Wood Carving Blocks BW18, 18-piece set

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Böker Pure Camellia oil 04BO175, 100ml

Flitz knife maintenance set, 4-piece

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools #MatchPatch, #01 OG-Green, patch

Knivesandtools #OneKnifeStand, knife stand

Handle/blade: birch wood/carbon steel
Blade length: 6.0 cm 
Weight: 45 grams

The **Casström No. 06 Classic Wood Carving Knife 15006** is a classic wood carving knife. To cut out a wooden spoon or a classic Swedish Dala horse from a piece of wood: the Casström No. 06 will give you the flexibility and grip you need. The wooden handle is sturdy compared to the blade length. As a result you will have enough control while cutting. The blade is made of carbon steel. A type of steel that is easy to sharpen. Be on the lookout, however, for rust: carbon steel is not stainless. So clean it after use, and occasionally add a couple drops of oil. Its pointed shape enables you to carry out many different tasks.

 The Casström No. 06 Classic Wood Carving Knife comes with simple leather sheath, without belt loop.



Casström No. 06 Classic Wood Carving Knife 15006 High Carbon

brand

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Casström No. 06 Classic Wood Carving Knife 15006 High Carbon

Casström No. 06 Classic Wood Carving Knife 15006 High Carbon

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Casström No. 06 Classic Wood Carving Knife 15006 High Carbon

Casström No. 06 Classic Wood Carving Knife 15006 High Carbon

Casström No. 06 Classic Wood Carving Knife 15006 High Carbon

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Casström No. 06 Classic Wood Carving Knife 15006 High Carbon

Relevant topics