Name: Chris Reeve Small Sebenza 31 Unique Graphics Cabochon Drop Point S31-1400-20 Triple Mosaic Opal pocket knife
Brand: Chris Reeve Knives
SKU: CRS31-1400-20-B
Price: 639 EUR
Availability: OutOfStock

Chris Reeve Small Sebenza 31 Unique Graphic Drop Point 2023 S31-1400-23-D pocket knife

legal_agecheck_key

notforsale

not_replaced_in

msrp_price

Spyderco Military S110V Dark Blue C36GPDBL pocket knife

Spyderco Paramilitary 2 S110V Dark Blue C81GPDBL2 pocket knife

WE Knife Beacon WE20061B-DS1 Damasteel, Black Titanium pocket knife

Chris Reeve Large Sebenza 31 Unique Graphics Cabochon Drop Point L31-1400-20-B Triple Mosaic Opal pocket knife

Chris Reeve Sebenza 31 Small Plain Glass Blasted Insingo S31-1685 pocket knife

Handle/blade: titanium/CPM S35VN
Blade length: 7.6 cm 
Weight: 85 grams

The **Chris Reeve Small Sebenza 31** is, alongside its 'big brother', *the* standard when it comes to pocket knives, you can find a great deal about it on the internet. There are, of course, other manufacturers who produce similar knives, but we haven't come across such a high level of quality in such an austere looking pocket knife.


This is the special version of the Sebenza 31: Unique Graphics with a Mosaic Opal inlay. We have several pieces that all look alike the photos, with subtle differences in the colours of the thumb studs and lanyard pins. This makes each knife unique!



For many people, the Chris Reeve Sebenza is the holy grail of the pocket knife world. Reeve’s drive for perfection and the continuous upgrade of the production quality, have inspired a generation of knife companies to aim higher. The Chris Reeve Sebenza is *the* model that started it all.



The hollow grind blade is enhanced with a convex edge which was applied by hand, and is made from S35VN, an advanced powder metallurgical type of steel. You can easily open the knife with one hand thanks to the anodized titanium thumb stud, after which it is locked by a rock-solid frame-lock.


When you compare the 31 to the Sebenza 21 you will also come across one of the main differences: the Sebenza 31 is enhanced with a ceramic lock interface. Sounds difficult, but it really isn’t. Instead of a titanium lockbar that is pushed against the blade to keep it open, a ceramic ball was pushed into the titanium. That ceramic ball is much harder than titanium, and will therefore have a longer lifespan. A clever innovation we had already seen on the Inkosi.



Another difference is the stop pin. It is hardened to make sure it will last longer as well. To complete the whole the pocket clip has been rotated a couple degrees to make sure it rests on the frame, instead of the lockbar. As such the lock is more consistent.



The top-quality titanium handle is sand-blasted which offers you enough grip. The blade has a stonewashed finished. This can best be described as a kind of satin gloss; it is not completely matte, but also not completely polished. Like all Chris Reeve Knives the Sebenza 31 is razor-sharp upon delivery.



Chris Reeve Small Sebenza 31 Unique Graphics Cabochon Drop Point S31-1400-20 Triple Mosaic Opal pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

videos

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Chris Reeve Small Sebenza 31 Unique Graphics Cabochon Drop Point S31-1400-20 Triple Mosaic Opal pocket knife

Chris Reeve Small Sebenza 31 Unique Graphics Cabochon Drop Point S31-1400-20 Triple Mosaic Opal pocket knife

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Chris Reeve Small Sebenza 31 Unique Graphics Cabochon Drop Point S31-1400-20 Triple Mosaic Opal pocket knife

Chris Reeve Small Sebenza 31 Unique Graphics Cabochon Drop Point S31-1400-20 Triple Mosaic Opal pocket knife

Chris Reeve Small Sebenza 31 Unique Graphics Cabochon Drop Point S31-1400-20 Triple Mosaic Opal pocket knife

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Chris Reeve Small Sebenza 31 Unique Graphics Cabochon Drop Point S31-1400-20 Triple Mosaic Opal pocket knife

Relevant topics