The **Fox Suru FX-526-TIBB** is an EDC knife designed by Jesper Voxnaes. Thanks to its small size and relatively friendly design the Suru Alu is the perfect knife to always keep close. The blade is made from stainless Böhler M390 steel. This steel retains its sharpness for a really long time, making it perfect for daily use.

You can clearly recognize Voxnaes' hand in the Suru. From the subtle dent in the handle to the comet-shaped thumb hole: the knife radiates Danish design. In addition to the thumb hole you can also use the flipper to quickly open the Fox Suru. When opened the blade is blocked by a solid framelock. To make sure it will function for years to come it is enhanced with a steel insert. It prevents wear and tear in the long run.

The handle is made from aluminium, enhanced with a PVD coating.

From peeling an apple or preparing a lunch to cutting cardboard to pieces or other packaging: the Fox Suru can handle it.

FOX Knives Suru FX-526-TIBB, M390 Black PVD, Titanium Black PVD, pocket knife

colour

Fox Suru Alu Black FX-526ALB pocket knife, Jesper Voxnaes design

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

Fox Suru Alu Green FX-526ALG pocket knife, Jesper Voxnaes design

Fox Suru FX-526CF Bronze, Carbon Fibre pocket knife, Jesper Voxnaes design

Fox Suru FX-526CFBL Blue, Carbon Fibre pocket knife, Jesper Voxnaes design

Fox Suru FX-526LEBR Bronze Titanium, Limited Edition pocket knife, Jesper Voxnaes design

Fox Suru FX-526LECF Arctic Storm Carbon Fibre, Limited Edition pocket knife, Jesper Voxnaes design

Fox Suru FX-526LECOP Engraved Copper, Limited Edition pocket knife, Jesper Voxnaes design

Fox Knives Suru, FX-526 MIBL Denim Micarta M390 Knivesandtools exclusive pocket knife

material_sheath

Fox Knives Suru, FX-526 PO Polycarbonate, M390 Knivesandtools exclusive pocket knife

brand

zm_series

legal_agecheck_key

notforsale

not_replaced_in

expectedRestockDate

videos

msrp_price

strike_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

FOX Knives Suru FX-526-TIBB, M390 Black PVD, Titanium Black PVD, pocket knife