Name: Grailer 1 Hollow, Green Micarta, Limited Edition pocket knife, Dirk de Wit design
Brand: Grailer
SKU: GR1-I-HLTD2
Availability: OutOfStock

Handle/blade: titanium & Green Micarta/M390
Blade length: 8.1 cm
Weight: 138 grams

The **Grailer 1** is an amazing pocket knife, designed by knife maker Dirk de Wit. This is it first ever production pocket knife designed by a Dutch knife maker. A top-quality pocket knife, made from the best materials by one of the best producers in the world.


**This is the limited edition of the Grailer 1. This knife has been enhanced with a hollow grind applied by hand resulting into a thin edge. In this collection only twenty pieces were made, of which there are a smaller amount of pocket knives with specific inlays. The blade is completely *clean* and doesn’t have a logo. However, very subtly, Dirk has engraved his name and the number at the bottom of the blade as #/20. This version has a Green Canvas Micarta inlay. A subtle material for an inlay, making the knife extra special without being too flashy.**


The Grailer 1 is based on the most recent custom knife made by Dirk de Wit which he started to develop in 2002. Throughout the years Dirk constantly made changes to the design and tested it. He also spend a lot of time listening to the feedback of those who used the knife, after which he made some more changes and tried out a new technique. Dirk’s design literally became production-ready on the drawing board.


For the production of this pocket knife we chose the best. The Grailer 1 is made by LionSteel in Maniago, Italy. For years LionSteel has been winning prize after prize. It truly is the best pocket knife producer in Europe, perhaps even the world. The only producer who was given Dirk’s blessing to start producing *his* knife.


The results are amazing, if we may say so ourselves. The Grailer 1 is the perfect example of Dutch Design and Italian ingenuity. In both form and function, the Grailer 1 is exceptional. Compact and light enough to carry around, sturdy enough to handle most heavy tasks. An EDC knife with a stylish look.


## Grailer 1: the technical aspects


Dirk’s custom knives might look simple, they, however, contain a lot of technical ingenuity. Dirk has been working with his hands for years, holding pieces of paper against his conservatory window, never using a computer. The challenge, however, when creating the Grailer 1, was translating Dirks method into a pocket knife that could be produced by a modern manufacturer.


### The blade


The blade on the Grailer 1 is made from Böhler M390 Steel. It is Dirk’s favourite type of steel and the only one he uses for his custom knives. M390 comes from Austria and is known for how it retains its sharpness and for its corrosion resistance. In this blade you can clearly find Dirk’s signature in the round plunge line where the blade becomes thinner, just before the handle.


### The pocket clip


As a left-handed man himself, Dirk is allergic to pocket clips that cannot be turned into either a left or right-handed clip. For this reason alone the clip on the Grailer 1 can be (re)moved without leaving visible screw holes. Even better: you can replace the clip with the included screw to get a completely ‘clean-looking’ knife. This solution in itself is very rare for a production knife.


### The pivot


The pivot is made from hardened steel which reduces the wear and tear and ensures that the blade runs smoothly. The diameter of the pivot-axle and the screw heads is extra-large which provides you with even more stability. There was no need to use Loctite during the assembly of the pivot because on the other side of the pivot you can find a contra-screw which holds the hinge screw. A rare construction for a production knife. We, of course, made sure that the pivot cannot turn itself relative to the handle.


### The Stop-pin


The stop-pin is also made from hardened steel to make sure that the lock remains perfect for years. This stop-pin is more than simply a screw with a small tube around it: it is an essential part of the construction and gives the handle additional stability.


### The handles


The Grailer 1 handles are made from titanium. The edges have a wonderful wavy finish. A typical Italian touch added by LionSteel. On the inside both titanium handles have large milled out chambers which makes the Grailer 1 relatively light in weight which increases the balance of the knife.


### The thumb studs


You can easily open the knife with one hand using the double thumb studs. Would you rather like to open the knife using two hands? Simply remove the thumb studs with the included tool.


### The framelock


When opened, the Grailer 1 is locked with the solid frame lock. A strong lock which uses the hand of the user to make the blocking even stronger. Typical for this Dirk-design is the large ‘collar’ around the pivot which slightly falls over the lockbar of the frame lock. As such you will never be able to disrupt the lock itself, keeping it in perfect condition for years.


## About designer Dirk de Wit


Ever since 1991 Dirk de Wit has been designing knives you can only dream of. Smooth lines, curves, attention paid to aesthetics and the use of the best materials: all characteristic for Dirk. The quality of his knives is recognized throughout the world. Coveted, but very scarce. With the Grailer 1 everyone will have the chance to own this perfect example of amazing Dutch Design. Dirk’s Dutch Design that is.


At knivesandtools we have been in love with Dirk’s work for years. He visits us often and together we talk about many knives. This is how we came up with the idea of making a knife together. It was how the Grailer 1 saw the light of day: *grail knives* we believe, are amazing, and, as an added bonus, are available to a larger audience.



Grailer 1 Hollow, Green Micarta, Limited Edition pocket knife, Dirk de Wit design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

videos

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Grailer 1 Hollow, Green Micarta, Limited Edition pocket knife, Dirk de Wit design