Name: Spyderco C250GTIP Bombshell Flash Batch pocket knife, Michael Burch design
Brand: Spyderco
SKU: SPC250GTIP
Availability: BackOrder

Agawa spare pins and c-clips

notforsale

not_replaced_in

msrp_price

Akinod Utility Folding Knife 18H07 Olive Titanium, gentleman's knife

legal_agecheck_key

Amare Knives Pocket Peak grey, pocket knife

strike_price

Amefa Metropole 1170 24-piece cutlery set

Amefa Oxford 1860 24-piece cutlery set

ANV M311 Spelter N690, Black Handle, M311-N690-028, Black Kydex Sheath, survival knife

Ardennes Coticule 707 Belgian Blue Whetstone for pruners, 100 x 30 mm

Ardennes Coticule 712 BBW, Belgian Blue sharpening steel, 20 cm

Ardennes Coticule Selected 100 x 40 mm

Ardennes Coticule wooden storage box for whetstone 150x40mm

ARM 2650 Battle Cord, Colour: OD-Green, 50ft (15,24 m)

Armatus Carry Architect sheath for the Benchmade Saddle Mountain Skinner Rosewood, black

Armatus Carry Architect sheath for the ESEE CR2.5, multicam

Armatus Carry Architect sheath for the ESEE Izula/Izula II, gunmetal grey

Armatus Carry Architect sheath for the ESEE Izula/Izula II, hunter orange

Armatus Carry Architect sheath for the Fällkniven F1x, black

Aurora Fire Starter 440CS silver

Autine Varidots, hand forged axe

Handle/blade: G10/CPM 20CV
Blade length: 7,6 cm
Weight: 130 gram


The **Spyderco C250GTIP Bombshell Flash Batch** is a robust and cool pocket knife, designed by knife maker Michael Burch. This is a 'Flash Batch' knife. This means it was produced just once, after which all moulds and necessary equipment was destroyed. Each knife contains a number, only 1250 pieces in total, worldwide.



This knife really speaks for itself. G10 handle, thick linerlock, CPM 20CV steel blade, and the excellent quality of the Spyderco factory in Taichung, Taiwan. Be quick because this knife is only available while stocks last. **Please note: only 1 piece per customer.**




Spyderco C250GTIP Bombshell Flash Batch pocket knife, Michael Burch design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_length

value_opened_length

value_blade_thickness

videos

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Spyderco C250GTIP Bombshell Flash Batch pocket knife, Michael Burch design

Spyderco C250GTIP Bombshell Flash Batch pocket knife, Michael Burch design

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Spyderco C250GTIP Bombshell Flash Batch pocket knife, Michael Burch design

Spyderco C250GTIP Bombshell Flash Batch pocket knife, Michael Burch design

Spyderco C250GTIP Bombshell Flash Batch pocket knife, Michael Burch design

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Spyderco C250GTIP Bombshell Flash Batch pocket knife, Michael Burch design

Relevant topics