Name: Spyderco Pingo PE Ti pocket knife, sprint run
Brand: Spyderco
SKU: SPC163TIP
Availability: OutOfStock

Agawa spare pins and c-clips

notforsale

not_replaced_in

msrp_price

Akinod Utility Folding Knife 18H07 Olive Titanium, gentleman's knife

legal_agecheck_key

Amefa Metropole 1170 24-piece cutlery set

productlabel

Amefa Oxford 1860 24-piece cutlery set

ANV M311 Spelter N690, Black Handle, M311-N690-028, Black Kydex Sheath, survival knife

Ardennes Coticule 707 Belgian Blue Whetstone for pruners, 100 x 30 mm

Ardennes Coticule 712 BBW, Belgian Blue sharpening steel, 20 cm

Ardennes Coticule Selected 100 x 40 mm

Armatus Carry Architect sheath for the Benchmade Saddle Mountain Skinner Rosewood, black

Armatus Carry Architect sheath for the ESEE 3, flat dark earth

Armatus Carry Architect sheath for the ESEE CR2.5, multicam

Armatus Carry Architect sheath for the ESEE Izula/Izula II, gunmetal grey

Armatus Carry Architect sheath for the ESEE Izula/Izula II, hunter orange

Armatus Carry Architect sheath for the Fällkniven F1x, black

Autine Trail Boss, hand forged axe

Bark River Bravo 1 CPM 3V, Desert Ironwood outdoor knife

Bark River Donnybrook CPM 154 Desert Ironwood

Handle/blade: titanium/ELMAX
Blade length: 5.3 cm
Weight: 83 g

Spyderco Pingo PE Ti pocket knife, sprint run

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

when spending at least €175 on Spyderco knives (1 per order)

Free Knivesandtools #OneKnifeStand

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Spyderco Pingo PE Ti pocket knife, sprint run

Free Knivesandtools #OneKnifeStand

Spyderco Pingo PE Ti pocket knife, sprint run

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Spyderco Pingo PE Ti pocket knife, sprint run

Spyderco Pingo PE Ti pocket knife, sprint run

Free Knivesandtools #OneKnifeStand

Spyderco Pingo PE Ti pocket knife, sprint run

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Spyderco Pingo PE Ti pocket knife, sprint run

Relevant topics