Name: We Knife 604A tanto pocket knife, blackwash/satined
Brand: WE Knife
SKU: WK604A
Availability: BackOrder
Rating: 9 (2 reviews)

Civivi Teraxe C20036-3 Black G10 Grey Steel, pocket knife

legal_agecheck_key

notforsale

not_replaced_in

msrp_price

Civivi Brazen C2023F Tanto, Green  Coarse Micarta pocket knife

Civivi Elementum C907T Dark Green Micarta pocket knife

CRKT Ritual 7471 pocket knife, Alan Folts design

Ballistol maintenance oil, 50 ml

Knivesandtools #EveryDayCloth, micro-fibre cloth

Nano-Oil 10w maintenance oil 8cc/8ml

WE Knife A-01A paracord lanyard with titanium bead, green-black

WE Knife A-01B paracord lanyard with titanium bead, black

WE Knife A-01C paracord lanyard with titanium bead, orange-black

WE Knife Titanium Paracord Bead A-02A, green

WE Knife Titanium Paracord Bead A-02B, purple

WE Knife Titanium Paracord Bead A-02C, blue

WE Knife A-03A paracord lanyard, green-black

WE Knife A-03B paracord lanyard, black

WE Knife A-03C paracord lanyard, orange-black

Skerper Pocket Strop STP002, stropping paddle

DMT Aligner ProKit sharpening system

Shapton Glass Stone sharpening set grit 500, 2000 and 8000, 50308

Work Sharp Multi-Sharpener Ken Onion Edition

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools Knife Pouch Black, by Maxpedition

 Fenix E18R rechargeable LED-flashlight

productlabel

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

WE Knife Gesila A-08A Black, titanium pry bar

WE Knife Gesila A-08B Grey, titanium pry bar

Work Sharp Angle Set knife sharpener, WSBCHAGS

Wera Bit-Check 12 metal 1, 12-piece bit set, 5057424001

Wera Bit-Check 30 Metal 30-piece bit set, 5057434001

DMT Diafold two-sided sharpening stone, FWFC

Fallkniven Diamond Ceramic Whetstone DC4

WE Knife Syrinx TP-04B EDC pen, Grey

TSPROF Blitz Complete sharpening system

Lansky Masters Edge Sharpener, MEDGE1

Handle/blade: titanium/CPM S35VN Blade length: 9,6 cm 
Weight: 121 gram

We Knife 604A tanto pocket knife, blackwash/satined

brand

colour

handedness

blade_finish

handle_material

knife_edge_type

knife_bladeshape

pocketknife_steel

pocketknife_onehanded

value_blade_length

expectedRestockDate

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Schönes Messer, macht einen guten Eindruck, gefällt mir.

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

value_blade_height

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

value_blade_thickness

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

value_opened_length

value_weight

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

multitool_tools

opening_system

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

pocketknife_lock

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

sharpening_angle

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

sharpening_type

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

We Knife 604A tanto pocket knife, blackwash/satined

We Knife 604A tanto pocket knife, blackwash/satined

Specifications

Also popular

Reviews

Average rating

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

We Knife 604A tanto pocket knife, blackwash/satined

Relevant topics

New Benchmade 2021 knives: Mini Osborne 945, Bugouts and more

CRKT's 2023 Line-up

Grailer in the German Messer Magazin