Name: Benchmade Freek 560-03 Carbon CPM-S90V, pocket knife
Brand: Benchmade
SKU: BE560-03
Price: 394.21 EUR
Availability: InStock
Rating: 10 (1 reviews)

The **Benchmade Freek 560-03** is practical pocket knife for everyday use. Light in terms of weight, massive in terms of performances. This special edition is made from high-end materials which makes this Freek part of the top of the Freek collection.

The Benchmade Freek is enhanced with a compact and manageable blade made from CPM S90V steel. This is a type of steel that retains its sharpness well and is incredibly wear-and-tear-resistant. The handle is made from carbon fibre. This is a high-end material from the racing and aviation industry. Light-weight and rock-solid. Because of the layers in the material and the milling work it looks amazing.

You easily open the blade one-handed by using the thumb stud. When opened Benchmade's famous Axis-lock keeps the blade in place. This pocket knife has a symmetric design, which is great for both left and right-handed use. The pocket clip is placed for right-handed use, but with the Torx T6 screwdriver you can easily change it for left-handed use.

So, are you looking for a high-end, light-weight pocket knife for daily chores? If so the Benchmade Freek is a great choice!

Benchmade Freek 560-03 Carbon CPM-S90V, pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

legal_agecheck_key

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

videos

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Was für ein Monster! Ausgewachsenes Taschenmesser mit handfüllendem und ergonomischem Griff. Klingenrücken exakt 2,9mm, ca. 0,6mm hinter der Schneide. Grandiose Action, u.a. durch die verhältnismäßig schwere Klinge. Kommt leider wie alle Benchmades mit S90V mit sehr grobem Schliff, tiefe Riefen und fast sägezahnartig. Wen das nicht stört und wer sich da zu helfen weiß, dem sei dieses robuste und handschmeichlerische Taschenmesser uneingeschränkt empfohlen!

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Benchmade Freek 560-03 Carbon CPM-S90V, pocket knife