Name: Bradford Knives Guardian 4.2 Black Micarta 3D, CPM-Magnacut, Sabre Grind, Stonewashed Finish, fixed knife
Brand: Bradford Knives
SKU: BDK-42S-101-MC
Price: 299.95 EUR
Availability: InStock

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Skerper Pocket Strop STP002, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Benchmade Blue Lube Cleanser 983901

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Blade-Tech Tek-Lok Small belt clip

Civivi T-Clip CA-04A belt clip, Bob Terzuola design

Blade-Tech IWB Loops, set of two belt loops

UltiClip 3+ Plus pant clip for sheaths

UltiClip Slim 2.2 clip for sheaths

UltiClip XL clip for sheaths

UltiClip Slim 3.3 clip for sheaths

Work Sharp Angle Set knife sharpener, WSBCHAGS

Fallkniven Diamond Ceramic Whetstone DC4

DMT Aligner ProKit sharpening system

Shapton Glass Stone HR sharpening set grit 500, 2000 and 16000, 50408

Lansky Masters Edge Sharpener, MEDGE1

The **Bradford Guardian 4.2 3D Black Micarta** is an excellent fixed knife for outdoor tasks. From hunting and hiking to bushcraft and survival purposes. With a blade length of 12.5 cm, this knife is perfect for a wide range of tasks. For example, cutting a piece of paracord, or making feathersticks. The handle feels amazing in hand and because of the finger groove just behind the edge you have a lot of control over the blade.

The blade is made from CPM MagnaCut. One of the most talked-about steels in 2021 and 2022. Many feel this type of steel is 'perfect'. Quite the statement. But they are right. It is a stainless type of tool steel. With a comparable toughness and sharpness retention of carbon steels such as CPM-CruWear, CPM-4V and Vanadis 4. The corrosion resistance is also sublime. Better than the popular stainless types of steel such as CPM S110V, CPM S45VN and Böhler M390. If that is not perfection, we don't know what is!

This Bradford Guardian 4 comes in a leather sheath. It is enhanced with a belt loop.

## Bradford Knives Guardian

Bradford Knives are made in the United States. In Kent, Washington, to be precise. They make fantastic knives from the very best materials. And at a remarkable price, considering the materials used and the American production.

Bradford Knives is known for the enormous number of different possible combinations on their knives. This is the: Bradford Knives Guardian 4.2 with sabre-grind, stonewashed blade made from CPM-Magnacut steel, 3D-handle scales made from black micarta, blackwashed hardware and a leather sheath.

Bradford Knives Guardian 4.2 Black Micarta 3D, CPM-Magnacut, Sabre Grind, Stonewashed Finish, fixed knife

colour

Bradford Knives Guardian 4.2 OD Green Micarta 3D, CPM-Magnacut, Sabre Grind, Stonewashed Finish, fixed knife

handedness

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

Bradford Knives Guardian 4.2 Camo Micarta 3D, CPM-Magnacut, Sabre Grind, Stonewashed Finish, fixed knife

Bradford Knives Guardian 4.2 Microtextured Black Blue G10 3D, CPM-Magnacut, Sabre Grind, Stonewashed Finish, fixed knife

brand

zm_series

legal_agecheck_key

expectedRestockDate

videos

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

value_max_belt_width

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Bradford Knives Guardian 4.2 Black Micarta 3D, CPM-Magnacut, Sabre Grind, Stonewashed Finish, fixed knife

Bradford Knives Guardian 4.2 Black Micarta 3D, CPM-Magnacut, Sabre Grind, Stonewashed Finish, fixed knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Bradford Knives Guardian 4.2 Black Micarta 3D, CPM-Magnacut, Sabre Grind, Stonewashed Finish, fixed knife

Bradford Knives Guardian 4.2 Black Micarta 3D, CPM-Magnacut, Sabre Grind, Stonewashed Finish, fixed knife

Bradford Knives Guardian 4.2 Black Micarta 3D, CPM-Magnacut, Sabre Grind, Stonewashed Finish, fixed knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Bradford Knives Guardian 4.2 Black Micarta 3D, CPM-Magnacut, Sabre Grind, Stonewashed Finish, fixed knife

Relevant topics