Name: EnZo Trapper 95 - Elmax Scandi - Green Canvas Micarta - 2092 with firesteel
Brand: EnZo
SKU: ENZ-2092
Availability: OutOfStock

Handle/blade: canvas micarta/Elmax
Blade length: 9.7 cm
Weight: 150 grams


The **EnZo Trapper 95** is is the most popular EnZo model. The long Finnish tradition of making knives is incorporated in each EnZo knife. The Trapper 95 is praised for its price-quality ratio and its versatility. The knife feels great in hand and, as such, offers you a lot of control for the finer hunting and bushcraft purposes. The small finger-guard ensures that you remain in control while you use it.


The full-tang blade is made from Elmax steel with a scandi grind. A scandi grind can easily be sharpened and is great for woodwork. Elmax is therefore very stainless, so low-maintenance and it retains its sharpness. For stainless steel it is also reasonably tough which means that it can withstand quite a lot.


The handle is made from green canvas-micarta. Practical and requires no maintance. The red liners make the knife look luxurious. However, the liners also have a practical function; it limits the impact between the material used for the handle, and the blade.


The knife comes with a handmade leather sheath. This edition also comes with a firesteel with micarta handle on the side of the handle.




EnZo Trapper 95 - Elmax Scandi - Green Canvas Micarta - 2092 with firesteel

brand

colour

zm_series

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

notforsale

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

EnZo Trapper 95 - Elmax Scandi - Green Canvas Micarta - 2092 with firesteel