Lansky Four Rod Diamant/Ceramisch sharpening system

With the Lansky Four Rod Diamond/Ceramic sharpening system you can quickly sharpen your knives. It works like the Spyderco Sharpmaker.

Assuming we are dealing with a blunt knife, the system works as follows:

• Place the two included diamond-coated sharpening rods in the appropriate holes of the wooden box (like is shown in the picture).
• Place the Lansky on a solid base and keep it in place with your hand.
• Take your knife and move the edge alongside each rod with at a 90-degree angle without applying pressure approx. 20 to 40 times.
• Afterwards replace the diamond-coated rods with the fine ceramic rods and repeat the same procedure.

First sharpen your knife according to the method mentioned above with the rods placed at a 20-degree angle. (also see the image).
Afterwards you take the rods from the holder and place them in the other two holes at a 25-degree angle, after which you only move your knife alongside the rods a couple times.
This last treatment removes burrs and also leaves you with a more sustainable edge.
The end result is, literally, a razor-sharp knife.

Also perfect in combination with a honing steel to make sure your knives stay sharp.
For the above mentioned procedure only use the white fine ceramic rods.

Scope of delivery:

• Wooden box with 20 and 25-degree holes for the ceramic rods.
• 4 sharpening rods, each 12.5 cm long (2 diamond-coated medium grit, and 2 white fine grit).
• You can also store the ceramic rods inside the box.

Because of the relatively short length of the ceramic rods the Pocket Ceramic Sharpening System is mostly suited for shorter knives.