Name: WE Knife 037, 910D Black pocket knife, Kellen Bogardus design
Brand: WE Knife
SKU: WK910D
Price: 361.58 EUR
Availability: BackOrder

Skerper Maintenance Oil Pen MA002, 10 ml

notforsale

not_replaced_in

Knivesandtools #OneKnifeStand, knife stand

Knivesandtools Knife Pouch Black, by Maxpedition

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Fenix E18R rechargeable LED-flashlight

productlabel

WE Knife Knife Pouch A-04, leather

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

WE Knife Gesila A-08A Black, titanium pry bar

WE Knife Gesila A-08B Grey, titanium pry bar

Work Sharp Angle Set knife sharpener, WSBCHAGS

Nano-Oil 10w maintenance oil 8cc/8ml

Work Sharp Multi-Sharpener Ken Onion Edition

TSPROF Blitz Complete sharpening system

WE Knife Syrinx TP-04B EDC pen, Grey

Lansky Masters Edge Sharpener, MEDGE1

Handle/blade: titanium/M390
Blade length: 10.3 cm
Weight: 115 grams

The **WE Knife 037,910** is a cool EDC knife, designed by Kellen Bogardus. At the 2019 Blade Show this knife won the award for *Most Innovative Imported Design*. A remarkable achievement, especially when considering the fact that the designer Bogardus was only 21 years old when he designed it. It demonstrates how innovative and remarkable this pocket knife really is.

 It is no surprise that the blade runs on ceramic ball bearings and that there is a lockbar insert. We have grown accustomed to it from WE Knife. Things get more interesting when we look at the construction of the handle. There are no frame screws visible from the side. These are located on the spine of the handle. Both scales have excellent tabs that slide together when the knife is assembled. Afterwards a screw is screwed through the tabs from the spine to fixate it.

 This leaves you with a remarkable construction and a sleek look and feel. Quite the challenge for WE Knife as a manufacturer, because it asks for strict tolerances. Fortunately WE Knife knows what it is doing.

 This construction is not the only remarkable thing about the 037. Bogardus namely decided to integrate the pocket clip in the handle. It saves you approximately 2 mm when compared to conventional pocket clips. The clip works well on the edge of your pocket, but when you use the knife you hardly notice that the clip is there. Very clever.

 You open the WE Knife 910 037 with the flipper. The blade will open quickly and is locked by a solid framelock. The blade is made from Böhler M390. An extremely wear-resistant type of steel that is stainless and retains its sharpness well.

 The WE Knife 037 910 is the perfect example of what WE Knife is capable of, and of the innovative design ideas of Kellen Bogardus. We expect to hear more from both in the future.



WE Knife 037, 910D Black pocket knife, Kellen Bogardus design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

WE Knife 037, 910D Black pocket knife, Kellen Bogardus design

WE Knife 037, 910D Black pocket knife, Kellen Bogardus design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife 037, 910D Black pocket knife, Kellen Bogardus design

WE Knife 037, 910D Black pocket knife, Kellen Bogardus design

WE Knife 037, 910D Black pocket knife, Kellen Bogardus design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife 037, 910D Black pocket knife, Kellen Bogardus design

Relevant topics