WMF Classic Line 1874586030 utility knife 14 cm

legal_agecheck_key

notforsale

not_replaced_in

msrp_price

WMF Classic Line 1874616030 bread knife 21 cm

WMF Classic Line 1874699990 6-piece knife set

productlabel

strike_price

WMF Classic Line 1874706030 7-piece knife set

Eden 21x5 cm knife guard

Eden 16x3 cm knife guard

Eden 27x5.5 cm knife guard

Eden magnetic knife strip acacia wood, 50 x 6 cm

Skerper Basic combi whetstone grain 180 / 600, SH001

Skerper Basic combi water stone grain 1000 / 3000, SH002

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

WMF Classic Line 1874516030 vegetable knife 8 cm

WMF Classic Line 1874576030 utility knife 12 cm

WMF Classic Line 1874546030 serrated utility knife 10 cm

WMF 1894656030 honing steel, 23 cm

Skerper Basic ceramic sharpening steel, 24.5 cm, SH003

WMF 1875136030 ceramic combination sharpening stone, 360/1000 grit

Eden EQP001 Wooden Cutting Board

WMF 1886879990 bamboo cutting board 38 x 25 cm

The **WMF Classic Line carving knife** is perfect for cutting thin slices of meat and fish, thanks to its long and low blade. The blade is less than 3 cm high, so slices are less likely to stick to the knife than knives with a higher blade length. When slices stick to the blade, they are also more likely to tear. This is what makes this carving knife perfect for cutting thin slices.

## WMF Classic Line type of steel

The blade is made from X50Cr15MoV steel, Sounds complicated, but this stainless steel is one of the most commonly used types of steel for kitchen knives. This is simply because it is easy to sharpen, retains its sharpness well and has excellent corrosion resistance. WMF sharpens each blade with laser precision. Each knife is individually measured with a laser, after which the optimal sharpening angle is determined. A robot then sharpens the blade to an unprecedented sharpness. Ready for a lifetime of intensive use. In addition, WMF's blades are heated with different temperatures. This makes the blade extremely hard. As such, the blades are very strong and corrosion resistant.

## WFM Classic Line handle

The handle is made from black POM. This is an extremely durable type of plastic that can withstand all substances and conditions that can occur in a kitchen. The blade runs throughout the entire handle. The POM scales are seamlessly attached to the blade in the traditional way, with two rivets. As such, no dirt can accumulate between the blade and the handle. Very hygienic! The handles of the Classic Line knives do not have a metal bolster, but they do have a thicker part of the handle. As a result, your fingers won't just slide off the handle and against the blade while cutting. What more could a cooking enthusiast ask for?

## WMF Classic Line

The WMF Classic Line kitchen knives are reliable and made for daily use in the kitchen. This series gets its name from its timeless, functional design. The knives are produced in Germany and therefore comply with high standards. This is reflected in the razor-sharp edge, the detailed finish and the well-crafted balance. And all that for an amazing price! In short: good knives for daily use or for those looking for a solid, first knife set.


WMF Classic Line 1874626030 carving knife 20 cm

brand

colour

series

handedness

blade_finish

blade_feature

kitchen_steel

handle_material

knife_edge_type

sharpening_type

sharpening_angle

delivered_as_a_set

kitchen_knife_type

value_number

value_number_of_knives

value_weight

value_blade_height

value_blade_length

value_overall_length

value_blade_thickness

expectedRestockDate

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

WMF Classic Line 1874626030 carving knife 20 cm

WMF Classic Line 1874626030 carving knife 20 cm

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

WMF Classic Line 1874626030 carving knife 20 cm

WMF Classic Line 1874626030 carving knife 20 cm

WMF Classic Line 1874626030 carving knife 20 cm

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

WMF Classic Line 1874626030 carving knife 20 cm

Relevant topics