There are many methods to sharpen your knives. For example, you can use a sharppening stone, or a sharpening rod, sharpening system or an electrical sharpening machine. You can also ask someone else to do the job. The best sharpening method for you, depends on the kind of knives you want to sharpen, the type of steel of the blade, your experience with sharpening and your own preferences.
In this article, we have lined up the mos common sharpening methods for you. Each method has its pro's and con's. We will describe these for you, as well as possible.
Sharpening stones are availabel in different grits and are ideal for sharpening blunt knives or maintaining sharp knives. The grit size of the sharpening stone affects the finish of the sharpened blade. The finer the grit, the better the folds of the blade are polished and thus the sharper the knife.
The grit size of the sharpening stones is indicated by means of numbers. A high number indicates a fine grit, for a fine polish of the blade.
A major benefit of sharpening your knives on a sharpening stone is that you can thin out your knife. When thinning out a knife, you grind away extra material on the sides of the blade, making the blade thinner. Thinning of a knife is useful for knives that are often sharpened, as the cutting edge gets fatter when the blade is sharpened more often. Thinning is of great importance for the preservation of good cutting properties.
Sharpening knives on a sharpening stone takes some practice but the reward is great: razor-sharp blades. In our video's we show step by step how you can sharpen your knives on a sharpening stone.
Whetstones - Video tutorial
Sharpening rods are rod shaped sharpening stones, intended to sharpen your knife in a few easy movements. There are different types of sharpening rods.
The most common sharpening rods are made of ceramic material. A ceramic sharpening rod is ideal to keep your knife sharp. This is fast and easy. However, it's very important to use this rod regularly, to prevent the knife from going blunt.
Besides ceramic rods, there are also grinding rods that have a layer of diamond. The hard diamond grains ensure that you can quickly regrind your knives. Compared to a ceramic rod, the result slightly less refined. A disadvantage of a diamond rod is that over time the diamond grains may break out or crumble off, which causes the rod to lose it's sharpening quality.
Sharpening rods are especially suitable for (small) maintenance of knives. For sharpening dull blades, it is advisable to use a sharpening stone or sharpening machine. Besides the above, we have the sharpening steel: It is important not to confuse sharpening steels with sharpening rods.
If you don't want to learn the skill of sharpening on a stone, a pull through sharpener may be a good option. The pull through sharpener consists of one or more smalle grinding wheels with a fine or coarse grit. In order to sharpen the knife you pull the knife several times through the grinding wheels without really pushing. The results of this shaprening method are of lower quality than sharpening rods and stones. The result is a relatively jagged edge, and the sharpness is of short duration. To get really sharp knives, it is therefore advisable to use one or more sharpening stones. The fast and somewhat rough treatment of a pull through sharpener is, in particular for harder steels, not recommended. A good knife actually deserves a more sophisticated sharpening method, such as sharpening on a stone.
For the cooking enthusiast without sharpening experience, an electric sharpener could be a great help. The electric sharpening machine has one or more slots with different types of sharpening wheels. The slots are already in a fixed grinding angle, providing a fixed, reliable edge. This benefit can also be a disadvantage, since European knives are sharpened under a different angle than Japanese knives. By pulling the knife through the slots one by one, it will be thoroughly sharpened. The electric sharpeners are pretty easy to use and deliver a good result. However, a sharpening turn removes significantly more material from the blade then with the use of a sharpening stone. This means that your knife will end up with a shorter life span if you use the electric sharpener regularly. For pocket knives, we do not advise to use an electric sharpening machine. This is because the machine removes quite a lot of material and pocket knives generally already have a thin blade.
Guided sharpening systems use a holder where you secure your knife, one or several sharpening sticks or conductors. Through the use of the holder, it is easy to select the right angle for sharpening. When using a guided sharpening system, there are two ways to sharpen your knife: a. Sharpening sticks are placed in the holder, after which you pull the knife along the different sharpening sticks, in order to sharpen it. b. The knife is secured in the holder, after which you pull the sharpening sticks along the blade. There are various systems for sale with a sharpening stone grinding the knife under a adjustable angle. The advantage is that you have a nice straight cutting edge. Disadvantage of this method is that it takes more time than grinding on a regular sharpening stone. Moreover, by sharpening with a fixed angle, you are much less flexible. So if you don't want to sharpen the knife in ze pre-fixed angle, you will still have to do it manually. The guided sharpening systems are highly recommendable for sharpening expensive pocket knives, because they provide a very nice cutting edge. By pasting the blade with adhesive tape, you can prevent any scratches caused by the clamping system. For kitchen knives, it is advisable to use a sharpening stone or electric grinder.